Acculink Belt

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

The Ideal Replacement For Conventional Rubber V-Belts!

• The ideal rescue belt or permanent substitute for conventional rubber V-Belts. Replaces 3L, 4L/A, 5L/B and C section belts.
• Easy snap-and-twist assembly - NO SPECIAL TOOLS REQUIRED!
• Perfect to use for emergency rescue repairs, preventative maintenance, high-temperature applications and difficult-to-align drives.
• Ideal for Extreme Operating Environments - offers superior resistance to solvents, oil, water and chemicals, as well as extreme temperatures from -40° F to +240° F.

Where To Use Accu-Link®

• Temporary or Permanent substitution for conventional Rubber V-Belts.
• Any conventional V-Belt application where it is difficult to install an endless belt - avoid costly labor intensive machine teardowns.
• Conventional V-Belt applications where chemical and high-temp resistance is needed.
• Mobile Service Vehicles where carrying a large inventory of belts is not practical.

ACCU-LINK® ADJUSTABLE LINK V-BELTS

• Solve V-Belt Drive Problems Quickly, Accurately and Permanently.
• Ideal for Diverse Operating Environments.
• Installation is a Snap!

Jason’s Accu-Link® V-Belts Are the Ideal Replacement Substitute for Conventional Rubber V-Belts.

• Durable urethane coating
• Rugged polyester fabric
• Can be assembled in any length
• Snap-and-twist assembly - no tools needed
• Chemical and high temp resistance
• Segmented link construction
• Versatility
• Horsepower capacity
• Interchangeability

• Increased life and durability
• Strength and longer life; maximum horsepower
• Readily available in emergencies - reduces inventory
• Easy assembly, a fast and reliable alternative, minimizes downtime
• Dependability in harsh environments
• Rolls on to drive pulleys like chain - no cords to break. Reduced vibration over conventional V-Belts
• Can be used in any industry, hundreds of applications. Can be used as singles or multiple V-Belts
• Same power ratings as conventional V-Belts
• Can be installed on existing pulleys with no changes in set-up

No Special Tools Required - Assembles in Seconds! Hold belt with tabs pointing outward Place end tabs throughtwo links at once Flex belt further andinsert second tab through end link by twisting tab with thumb. Ensure tab returns toposition across belt. Reverse belt so tabs run inside Disassembly Hold belt upside down.Bend back as far as possible, hold with one hand. Twist one tab 90° parallel with slot. Pull end of link over tab. Rotate belt end with tab 90°. Pull belt through the two links.

Installation Before installing, turn belt inside out and couple the belt Place endless Accu-Link® V-Belt in the nearest small sheave groove. Extend belt and place in the nearest large sheave groove Manually turn the Accu-Link® V-Belt until it is in groove all around drive. Do not jog motor Continue to manually work the belt from groove to groove. Repeat until all grooves are filled. Tension belts using the same method for equivalent size conventional rubber belt.

NOTE: Unlike conventional V-Belts, Accu-Link® can be rolled onto pulleys - no cord to break.