24 / 44
24
Van Gorp Quarry Duty Wings are designed for long life
in the most rugged applications. Most wing pulleys
eventually need to be replaced because of excessive
contact bar wear. Van Gorp's 3/4 inch thick by 2 inch
wide Quarry Duty contact bars are much thicker than
necessary to meet CEMA load ratings and can add
many years of life to a pulley. Longer life results in
reduced down time and increased productivity (profit).
The contact bars are welded to heavy duty wings that
are welded to thick steel end discs. The end discs
are submerged arc welded to XT hubs to give you the
strongest wing pulley design possible.
Quarry Duty Wings are available in diameters ranging
from 16 through 60" and face widths 12" to 76".
RUGGED FOR LONG LIFE
— Built for the stress and
strain of big loads...or unusually long, large conveyor
systems. All welded steel construction. Outer bars
have a long radius surface for maximum traction and
minimum belt wear. All pulleys are jig welded, and ac-
curate concentricity is assured because the contact
bar is hydraulically pressed against the exterior wing
edge and then welded together. Individual gussets are
welded continuously to each wing and the hub forming
a strong double-cone design.
Available on XT
®
,
Tapered Bore or
Q-D
®
Hubs.
Extra Heavy Duty Wing and
Quarry Duty Wing Pulleys
Extra Heavy (Mine Duty) Wing Pulleys
Quarry Duty Wing
Quarry Duty Wing
Pulley Diameter
Crown Face
Face Width
Hub Type and Size
WQ 18 C 38 XT35
Part Number Example
Extra Heavy (Mine Duty) Wing
Pulley Diameter
Crown Face
Face Width
Hub Type and Size
WH 18 C 38 XT35
Part Number Example