19 / 44
19
True Turn
®
Machined Face
Built with heavy wall tubing and machined in a lathe,
all VAN GORP
®
True Turn
®
Conveyor Pulleys undergo a
quality, precision method of construction that results in
a heavy-duty pulley, machined for close tolerance and
accurate pulley concentricity.
Each component has been built to an exact manufac-
turing requirement. A jig is used to properly position the
hubs and end discs inside the tube. The components
are firmly secured in this jigged position and all neces-
sary bonding welds are completed. This jigging method,
plus the use of high-quality steel throughout, ensures
you of a continuously welded drum pulley construction,
with maximum strength to weight ratio, true concentric-
ity, and the virtual elimination of maintenance problems
resulting from dirt, water and steam.
Available in 4" -5" -6" -8" diameter sizes.
Bushing Location Dimensions
Table No. 30
XT
®
Bushings
True Turn
®
Pulleys with Q-D
®
and Tapered Bore Bushings
are available on application. Contact the Factory.
Unit Handling Machined Crown
True Turn
®
Pulleys
Custom Designed Pulleys for Package Handling
Your design or ours?
We will design pulleys to meet your application needs, or we will manufacture to your
prints and specifications.
True Turn
Pulley Diameter
Crown Face
Face Width
Hub Type and Size
T 6 C 51 XT25
Part Number Example
3/4
5/8
1/2
American Made