23 / 44
23
Wing pulleys, in general, are designed to be used
in the dirtiest and most abrasive part of
the conveyor system. Their self cleaning
action is required to reduce material
build up between the pulley and
the belt which can cause belt
misalignment and belt wear.
When these conditions be-
come so abusive that they
actually reduce the life of a
conventional wing pulley, an
XT-reme
TM
solution to the prob-
lem is required.
VAN GORP
®
XT-reme
TM
wings have
heavier contact bars, heavier wings and have reinforc-
ing rings on all sizes. It also features the XT
®
system
which is the premier hub and bushing system for con-
veyor pulleys.
The XT-reme
TM
wing is available in diameters ranging
from 12 to 36 and face widths 12 to 76. It is also avail-
able with new VAN GORP
®
◆
DB
◆
replaceable wing
lagging for even more wing pulley life.
Features and Benefits
• Heavier contact bar for added
wear in abrasive applications.
• Heavier wing for a greater load
carrying service factor.
• Reinforcing rings tominimize the
bending of the wing tips.
• XT
®
Hub and bushings with su-
perior torque and thrust ratings.
XT-reme™ Wing Pulleys
XT-reme™Wing
Pulley Diameter
Crown Face
Face Width
Hub Type and Size
WX 18 C 38 XT35
Part Number Example
American Made