16 / 44
16
With continuously welded disc-to-rim construction
and compression type hubs, VAN GORP has turned
the weak link in most elevator conveyor systems into
the strong point. Now, you get a super strength, one
piece, single disc steel elevator pulley, superior to any
other on the market today.
Here’s why: with a VAN GORP
®
Pulley, you get
a stronger, heavy-duty component...with high
compression hub and bushing. (The XT
®
hub and
bushing was selected because XT
®
holding power is
unequaled in pulley applications...and “pulley walking”
on the shaft IS NOT a common problem with this hub
design.) Intermittent welding of the disc to the rim is
common in most elevator pulleys. However, at VAN
GORP, we continuously weld the disc to the rim. Plus,
the leading and trailing edges of the rim are formed
before rolling. This forming process minimizes the rim
seam’s flat spot.
Table No. 23 — Bushing Location Dimensions
Contact factory if other hubs required
XT
®
Elevator (Single Disc) Pulleys
Single Disc Elevator
Pulley Diameter
Crown Face
Face Width
Hub Type and Size
E 36 C 15 XT35
Part Number Example
FACE
A
C
D
DIA.
B