13 / 44
13
VAN GORP’s Turbine Discs are “State-of-the-Art”
conveyor pulleys used on high tonnage steel cable
belt systems where belt tensions can often exceed
200,000 pounds. These systems require a special pulley
designed to minimize the inherent stresses in a pulley
which result from the rolling and welding processes
during fabrication. The integral hub-end disc turbine
replaces the critical hub to end disc welds of a regular
drum pulley with a large transitional radius designed
to minimize stress. The only weld on the end disc is
where it is welded to the rim which is at the lowest
stress point of the end disc.
Turbine Disc Drum Pulleys are available from VAN GORP
with keyless locking assemblies up to 27 1/2" bore.
All Double Drum and Turbine Type End Disc Pulleys
are provided with a Serialized Metal Tag.
Turbine Disc Conveyor Pulleys
®
VAN GORP
BOX288
PELLA,IOWA 50219