14 / 26
Cement SC 4000 (CFC-free) - with hardener E 40
Cement SC 2000 (nonflammable) - with hardener UT-R20
These adhesives are available in three versions/colours:
standard (green), conductive for ATEX installations,
underground equipment (black) and for the adhesion of
white rubber lining, e.g. in the food industry (white). Final
strength after 24 hours.
Cement BC 3004 (CFC-free) - with hardener E 40
Cement BC3000 (nonflammable) -with hardener UT-R20
These adhesives feature a long open tack time, therefore
they are especially suitable for very large area bonding.
Colour: blue. Final strength after 7 days.
REMA TIP TOP
metal primers are used to precondition
metal surfaces prior to rubber-metal bonding with
REMA TIP TOP
bonding systems. The concerted
primers and adhesives ensure a high-strength bonding
system, providing optimum bonding strength and
highest surface protection.
•
Good corrosion protection against atmospherical
influences like ozone and moisture
•
Outstanding rubber-metal bonding
Primer PR 200 (gray) and PR 304 (red), (both CFC-free)
Primer PR 300 (red) (nonflammable)
REMA TIP TOP Bonding Systems
The pulley and idler lagging featuring a CN bonding layer
can be easily and permanently applied to the prepared
steel-surface of pulleys and idlers with the excellent
REMA TIP TIP
bonding systems. This perfectly con-
certed system, consisting of cleaning fluid, primer,
cement, hardener and a CN-layer has achieved out-
standing results worldwide and in different climates. The
rubber-metal bonding and bonding-joints, feature out-
standing static and dynamic stability and are processed
by technicians, trained at
REMA TIP TOP
.
Properties:
•
Durable and reliable bond
•
Excellent tack properties
•
Very high separating strength
•
Extraordinary dynamic stability
•
Good temperature resistance
•
Approval for underground use in mines
(nonflammable adhesives)
Additional products for pulley lagging
BONDING SYSTEMS AND SPECIAL TOOLS
REMA TIP TOP special tools
The entire program of special tools - from pro-
fessionals for professionals - offers proven tools
and devices for the lagging of pulleys and idlers:
•
Rubber mallet
•
Stitcher with ball bearing
•
Rubber cutting knife
•
Offset knife
•
Hand stripper JUNIO HS (for removing rubber
lagging from plane metal-surfaces)
•
Rubber cutting machine MODEL 32
(maximum rubber thickness 50 mm)
•
Angle grinder LK 604 “FLEX“ for professional
rubber buffing
•
RUBBER CUT 400 Profile Groover
12
Industrie