1 / 26
Industrie
Exclusively from REMA TIP TOP/NORTH AMERICA
REMA GOO
REMA Goo
is designed to be a high performance temporary conveyor belt repair product
that allows you to fix your belt in less than an hour. (Note: repair times are dependent on
cure temperatures.)
ONE BRAND – ONE SOURCE – ONE SYSTEM
Longer Lasting Performance
•
REMA GOO
Flexible Conveyor Belt Repair Material is formulated to last longer.
•
REMA GOO
is a 100% solids polyurethane formulation which meets VOC regulations. It does
not post harden and will remain flexible. It also resists shrinking after application and exhibits
good UV resistance.
•
REMA GOO
’s flexible formulation reduces the chance of bond failure at edges of repair caused
by rounding over conveyor pulleys.
•
REMA GOO
cures to a softer 60 (
±
5) Shore A Durometer which allows the repair to wear at a
rate similar to that of the conveyor belt covers.
•
REMA GOO
exhibits excellent adhesions to conveyor belt.
Faster On-Site Repairs
•
The most common types of conveyor belt damage which are cuts, gouges and small holes
can be completely repaired with minimal system downtime.
•
No hand mixing of material is required. The
REMA GOO
is applied by using the
REMA GUN
Manual Dispenser.
•
Longer Lasting
Performance
•
Faster On-Site
Repairs
•
Easier to Apply
•
Lower Unit Cost