21 / 84
BANDED V-BELTS
POWERING GLOBAL INDUSTRY
19
UniMatch® Banded V-Belts - Classical Sections
B, C, D
(Oil & Heat Resistant/Static Dissipating)
UniMatch® Banded V-belts are available in Classical sections B, C and D, and feature the
same premium constructions as the individual belt, bonded together with a fabric-neoprene
top band. These belts are often used on vertical shafts and where belt vibration, whipping
and turn-over must be minimized.
Stock Banded Classical V-belts are listed on page 20. To obtain the total list price, multiply the list price per rib by
the total number of ribs per band. In-between lengths of the B, C and D sections are available, as are lengths to
600 inches in the B and C sections on special order. Consult Jason/Megadyne Customer Service. These belts
conform to ARPM Engineering Standard IP-20.
Banded Classical V-belts are specified by a number followed by a forward slash which indicates banded
construction and number of ribs, and a letter/number combination indicating the base belt part number -
Example: 8/C90
8/C90
8/ =
One banded belt with 8 ribs
C =
Indicates belt cross section
90 =
ARPM Standard Length
Designation
Features & Benefits
l
Banded Construction
- Fabric/Neoprene top band enhances
stability and prevents belts from turning
over or coming off the drive. Minimizes
vibration.
l
Static Dissipating
- Safe operation in potentially dangerous
atmosphere
l
Oil & Heat Resistant
- Durability in tough environments
Construction
Compound
- NR/SBR
Cord
- Polyester
Cover
- Cotton/polyester blend
Top Band
- Fabric/Neoprene
Applications -
General Industry, HVAC Equipment, Lawn & Garden, Agriculture
Engineering Standards -
Conforms to ARPM standard IP-20
Recommended Pulleys -
Use pulleys made to ARPM standards
Special Order Availability -
RB48 to RB105, up to 28 ribs wide
RB108 and up, up to 26 ribs wide
RC - All sizes, up to 22 ribs wide
RD - All sizes, up to 15 ribs wide
Special Lengths -
In-between lengths and lengths up to 600 inches available by special order
Note -
2 and 3 rib belts are not returnable
It is common practice for some belt suppliers to fill orders for banded V-belts by supplying separate bands (belts)
that add up to the total number of ribs requested. Normal policy for Jason/Megadyne is to supply a one-piece
banded V-belt unless otherwise requested.
Example: Order is for one belt with 8 ribs.
Some suppliers will send
two belts with 4 ribs each. Jason/Megadyne will ship as ordered, one belt with 8 ribs, unless otherwise specified.
PART NUMBER DESIGNATION
BANDED V-BELTS