19 / 84
17
V-BELTS
POWERING GLOBAL INDUSTRY
V-BELTS
Double-V (Hexagonal) Classical Belts -
AA, BB, CC Cross Sections
Specially designed for serpentine and reversing drives, Double V-belts transmit power from
both sides of the belt. Polyester cords and cotton/polyester cover provide maximum strength
and length stability with minimum stretch. These belts conform to ARPM Engineering Standard
IP-21. Double V-belts are available in three standard ARPM sections - AA, BB and CC - and in
lengths up to 540 inches. They are specified by belt section letters and a Standard Length Designation that is
equivalent to the length of single "V" profile belts -
Example: AA49
CC Section - Dry can belts available on request. These are used in
drying can applications in the textile industry.
Features & Benefits
l
Polyester Tensile Member
- Maximum strength, minimum stretch
l
Dual Cross-Section Construction
- Flexibility in design; delivers
power from both sides of
the belt
l
Center Cordline Construction
- Increased flexibility on reverse
bend or serpentine drives; longer
life than standard belts
Construction
Compound
- NR/SBR
Cord
- Polyester
Cover
- Cotton/polyester blend
Applications -
General Industry, Lawn & Garden, Agriculture, Textile,
Material Sorting Equipment
Note -
These belts do not use the same nomenclature as
Agricultural belts. Refer to Jason/Megadyne Engineering
for length conversions
Engineering Standards -
Conforms to ARPM standard IP-21
Recommended Pulleys -
Use pulleys made to ARPM IP-20 for the
respective single V-belt
0.41"
AA
0.50"
BB
0.53"
0.66"
CC
0.69"
0.88"
NOMINAL CENTER WIDTH