18 / 84
16
V-BELTS
POWERING GLOBAL INDUSTRY
V-BELTS
Open-End V-Belting - 3L/O, A, B, C
Available in Perforated or Solid Construction
Open-End V-belting is used for specialized requirements where difficulty of
installation prevents the use of endless belts or for emergency repairs.
Open-End comes in either perforated (pre-drilled for easy cutting and
fastener installation) or solid construction where a more durable belt is
required. Open-End V-belting has an oil and heat resistant neoprene cover.
Belting is cut to desired length and joined with metal fasteners. Only a knife
and screwdriver are required for assembly.
Available in four sections as shown below. Standard roll length is 164 ft.
(50 meters).
Features & Benefits
l
Easy Assembly
- Machinery does not have to be dismantled to install
l
Cut to Desired Length
- Readily available in emergency situations
l
Perforated Construction
- Allows for easier joining - pre-drilled holes for easy fastener installation
l
Solid Construction
- Slightly better tensile strength (hp/torque capability) than perforated version
l
Multi-Layer Reinforcement
- Consistent strength, good fastener retention
PART TOP BELT
NUMBER WIDTH CONSTRUCTION
3L/O
3/8"
Perforated
3L/OS
3/8"
Solid
3L/OF
--
Fastener
A
1/2"
Perforated
AS
1/2"
Solid
AF
--
Fastener
B
21/32" Perforated
BS
21/32" Solid
BF
--
Fastener
C
7/8"
Perforated
CS
7/8"
Solid
CF
--
Fastener
Standard Roll Length is 164 ft. Add 20% for shorter lengths.