25 / 84
BANDED V-BELTS
POWERING GLOBAL INDUSTRY
23
UniMatch® Banded V-Belts - Deep Wedge Cog
Sections 3VX, 5VX
(Oil & Heat Resistant/Static Dissipating)
UniMatch® Banded V-belts are now available in Deep Wedge Cog sections 3VX and
5VX. They feature the same premium constructions as the individual Cogged Raw
Edge belts and are bonded together with a fabric-neoprene top band. These belts
are often used on vertical shafts and where belt vibration, whipping and turn-over
must be minimized.
Stock Banded Deep Wedge Cog V-belts are listed on page 24. To obtain the total list price, multiply the list price
per rib by the total number of ribs per band. These belts conform to ARPM Engineering Standard IP-22.
Banded Deep Wedge Cog V-belts are specified by a number followed by a forward slash which indicates banded
construction, number of ribs and a letter/number combination indicating the base belt part number -
Example: 3/3VX335
Features & Benefits
l
High Power Capability
- High power with a more compact drive
l
Raw Edge Sidewalls
- Increased aggressiveness reduces slippage
and increases efficiency versus wrapped
V-belts. Saves energy.
l
Banded Construction
- Fabric/Neoprene top band enhances
stability and prevents belts from turning
over or coming off of the drive. Minimizes
vibration.
l
Oil & Heat Resistant
- Durability in tough environments
Construction
Compound
- Chloroprene
Cord
- Polyester
Sidewalls
- Raw Edge
Top Band
- Fabric/Neoprene
Applications -
General Industry, HVAC Equipment, Lawn & Garden, Agriculture
Engineering Standards -
Conforms to ARPM standard IP-22
Recommended Pulleys -
Use pulleys made to ARPM (RMA) MPTA standards
Special Order Availability -
Made to Order sizes available upon request:
R3VX - up to 100" length, up to 70 ribs wide
R3VX - over 100" length, up to 5 ribs wide
R5VX - up to 100" length, up to 43 ribs wide
R5VX - over 100" length, up to 5 ribs wide
Note -
2 and 3 rib belts are not returnable
It is common practice for some belt suppliers to fill orders for banded V-belts by supplying separate bands
(belts) that add up to the total number of ribs requested. Normal policy for Jason/Megadyne is to supply a one-
piece banded V-belt unless otherwise requested.
Example: Order is for one belt with 8 ribs.
Some suppliers will
send two belts with 4 ribs each. Jason/Megadyne will ship as ordered, one belt with 8 ribs, unless otherwise specified.
3/3VX335
3/ =
One banded belt with 3 ribs
3V =
Indicates belt cross section
X =
Indicates raw edge cog
335 =
Effective length in tenths of
an inch = 33.5"
PART NUMBER DESIGNATION
BANDED V-BELTS