220 / 235
< 5 >
7. Setup Instructions
1.
Install swaging jig of desired size firmly to the pre-installed fixture using wrench.
Fixture Swaging jig
2.
Insert swaging die into swaging jig. Jig key should fit in swaging slot.
Swaging die Jig key Swaging die slot
3. Position bolt in the center of swaging die and tighten it 6 mm Allen key to fix swaging die onto piston
8. Prepare Tubing
1.
Check if tube O.D , wall thickness , circularity, hardness and their tolerance are within specifications for
your application. Also check if surface is free from scratches and dirt.
2.
Make a square cut.
3. Remove burs from inner and outer edges of tube.