REMA-Master GoodyearBelting.com 866-711-4673

7 / 26

For medium to heavy-duty operating conditions
REMAGRIP 65 !.$ 70
Products
Property REMAGRIP
65/CN
REMAGRIP
65 V/CN
REMAGRIP
70/CN
REMAGRIP
70 V/CN
REMAGRIP
70 S/CN
REMAGRIP
70 HR/CN
REMAGRIP
70/CN-SL
Polymer BR/IR/SBR CR BR/IR/SBR CR SBR/BR IR/BR BR/IR/SBR
Density [g/cm3] 1.12 1.42 1.12 1.40 1.24 1.12 1.13
Hardness
[Shore A] 63 ± 5 62 ± 5 63 ± 5 62 ± 5 68 ± 5 62 ± 5 60 ± 5
Abrasion [mm3] 120 130 120 130 125 60 120
Resilience [%] 47 27 47 27 40 53 45
Profile grooves
[mm] 50 x 6 x 3 50 x 6 x 3 50 x 10 x 8
50 x 8 x 6
50 x 10 x 8
50 x 8 x 6
50 x 10 x 8
50 x 8 x 6
50 x 10 x 8
50 x 8 x 6 50 x 8 x 6
Colour black black black black black black schwarz
Flammability – self-
extinguishing 1) – self-
extinguishing 1) flame resistant 2) – –
Electric
Resistance – anti-static 1) 3) – anti-static 1) 3) anti-static 1) 3) – –
Approval for
underground
use
–
D (LOBA) 4)
PL (WUG) 5)
USA (MSHA) 6)
RUS (GOST) 7)
–
D (LOBA) 4)
PL (WUG) 5)
USA (MSHA) 6)
RUS (GOST) 7)
– – –
Operating
temperature
- 30 °C to
+ 80 °C
- 30 °C to
+ 80 °C
- 30 °C to
+ 80 °C
- 30 °C to
+ 80 °C
- 30 °C to
+ 80 °C
- 30 °C –
+ 90 °C
to + 110 °C
for a short time
- 30 °C to
+ 80 °C
REMAGRIP 65/CN
Available special rubber grades: V
REMAGRIP 70/CN
Available special rubber grades: V, S, HR
REMAGRIP 70/CN-SL
(strip lagging)
Fields of application and product advantages:
• Grooved rubber lagging for drive pulleys
• Avoidance of material build-up with positive influence
on belt tracking
• Reduced slippage between belt and pulley through increased
coefficient of friction
• Evacuation of moisture and dirt
• Protects the pulleys from wear and corrosion
• Long belt conveyors (REMAGRIP 70)
• Large pulley diameters (REMAGRIP 70)
• For high-tension fabric belts and medium to high-tension
steel-cord belts ( REMAGRIP 70)
Further advantages REMAGRIP 70/CN-SL
(strip lagging):
• Significantly improved evacuation of water
through additional horizontal grooves
• Preparation of the strips in the workshop,
in the warehouse or on site
• Scrap reduced to a minimum
• Can be trimmed precisely with the REMA TIP TOP
rubber cutting machine MODEL 32
• Easy application, even to pulleys in situ
1) Meets all safety requirements according to DIN 22100-7 (fire safety, hygiene, electrical)
2)according to EN 20340 5) Polish approval: Dopuszczenie WUG Katowice-no. GM97/03
3) also for ATEX-installations 6) USA: MSHA IC-205/1
4) LOBA-No.: 18.43.21-89-33 7) RUS: GOST PPC 00-17855
Technical data:
Industrie
5