53 / 84
Synchronous Belt - Made To Order
Belt Information
RUBBER SPECIAL CONSTRUCTIONS
XL, L, H, XH, 3M, 5M, 8M, 14M - Contact Jason/Megadyne for
Length Availability
Many specials are available from stock. Made to order items are generally
available within 3 weeks.
Non-Marking Chloroprene –
Non-marking chloroprene stock compounds are
specially formulated for packaging, bottling and applications requiring belts
to leave no imprint on surfaces. Available in the following compounds:
Pink (70 Duro)
*White (40 Duro)
Black (50 Duro)
Gray (*50 and 65 Duro)
*Yellow (40 Duro)
**Blue FDA (65 Duro)
*Non-Marking Chloroprene compounds are Dual-Durometer Constructions and require a Black 70 Durometer
Chloroprene underply
**Does not imply that belts made from Blue FDA are FDA approved. Reference to FDA means raw materials used
to produce the compound comply with US Code of Federal Regulations Title 21, Part 177.2600
Non-Marking Latex –
Formulated for extremely high coefficient of friction. Ideal for conveying and incline
applications.
Available in:
Red (40 Duro)
Yellow (40 Duro)
Black (60 Duro)
All Latex Compounds are Non-Marking
All Latex compounds are Dual-Durometer Constructions and require a Black 70 Durometer Chloroprene underply.
Anti-Static Compound – Black (70 Duro) – For use in applications where static build-up and discharge could
damage electrical components.
EXTRA BACKING
Additional thickness of standard Black (70 Duro) chloroprene compound
Also used as foundation for secondary shaping and machining of belt back
Available with any of the above compounds
Usually limited to 1/2” overall thickness – All Pitches
Each of the above special constructions are fully-molded, not glued-on layers.
Dual-Durometer Constructions cannot be made to the standard belt thickness; they must have a minimum of 1/16”
extra backing.
Special Widths (Standard constructions only) – Non-standard and full sleeve widths are available from stock! No
minimum quantity.
TENSILE MEMBERS – Fiberglass cord with alternate S&Z twist is standard. For right or left hand tracking, specify
S-twist or Z-twist.
MADE TO ORDER PRICING - RUBBER SYNCHRONOUS/TIMING BELT CONSTRUCTIONS
FEATURE
MINIMUM ORDER QUANTITY
Non-Standard Compounds
1 Sleeve
Extra Backing to 1/8"
1 Sleeve
Extra Backing to 1/4"
1 Sleeve
Extra Backing to 3/8"
1 Sleeve
Class 1 Grind Thickness
± .005
1 Sleeve
Special Tensile Member Twist - S or Z 1 Sleeve
Special Tensile Members or Compounds - Consult Jason
1. To avoid pyramiding of cost, calculate each additional charge on List Price.
2. Sleeve widths are 38" up to 50" pitch length, and 20" width above 50" pitch length.
Note: We will ship and invoice less than full sleeve quantities in the event of quality control rejects.
Consult Jason/Megadyne customer service for pricing.
SYNCHRONOUS BELTS
POWERING GLOBAL INDUSTRY
SYNCHRONOUS BELTS
51