49 / 84
PLATINUM is an Ultra-High Performance, rubber-based synchronous belt. "Dual Core"
Hybrid Tensile Cord Technology, combined with a nitrile-based HNBR compound body,
results in a product capable of handling the most demanding high-power, high-torque
drives. Designed to replace drives using roller chains and gears, and as an alternative
to Poly Chain®, PLATINUM permits a high-power capacity drive with excellent
dimensional stability and a fully-functional interchange with all of the most common deep pulley tooth profile
systems currently in use.
With PLATINUM, Jason/Megadyne introduces a revolutionary new "RPC" belt tooth profile. An evolution of the
industry standard RPP®, the new "RPC" belt tooth profile is fully interchangeable with HTD®, RPP® and Poly Chain®
pulley tooth profiles. The RPC belt tooth profile allows existing drive systems (RPP®, HTD®, PCGT® and PowerGrip®
GT® 2) to be upgraded without replacing the pulleys. PLATINUM is a true "drop-in" replacement on all commonly
used pulley profiles. RPC PLATINUM synchronous belts are specified by belt pitch length, tooth pitch and belt
width in millimeters -
Example: 3500PLT14M65
PART NUMBER DESIGNATION
3500PLT14M65
3500 =
Pitch length in millimeters
PLT =
Platinum - extra high torque RPC
construction
14M =
Tooth pitch = 14mm
65 =
Belt width in millimeters
Pitch Tooth Pitch
Code (mm)
Standard Widths/Width Codes (mm)
12 20 22 35 42 60 65 90 120
Pitch Lengths
PLT8M
PLT14M
8 12 - 22 35 - 60 - - -
248 thru 4400mm
14 - 20 - - 42 - 65 90 120
994 thru 4410mm
NOTE: Widths shown are considered standard, but Platinum can be cut
to any width desired.
Features & Benefits
l
RPC Tooth Profile
- Compatible with Poly Chain®, RPP®, HTD®, PCGT® and PowerGrip® GT® 2 pulleys
l
Highest Power Capacity
- Reduced belt and pulley width produce less noise, reduces drive weight, bearing load
and cost, with increased efficiency and energy savings
l
Dual Core Hybrid Tensile Cord
- Guarantees high power capability and maintenance-free operation
l
Available in Any Width
- Unlimited width possibilities. Jason/Megadyne will cut to desired width
l
Greater Length Range
- Over 70 different lengths available - more than any competitor
l
Lower Noise
- HNBR Rubber based technology is quieter than polyurethane belt
l
High Temperature Capability
- Up to 239°F versus 185°F for polyurethane
l
HNBR Rubber Construction
- Better flexibility than polyurethane belts. Important for drives with idlers
Construction
Compound
- HNBR with high resistance to petroleum oils and solvents
Tensile Cord
- Dual Core Hybrid
Tooth Cover
- Specially treated nylon fabric to reduce friction and pulley wear
Applications -
Drives requiring maximum efficiency or synchronous operation and highest power capacity. General
industry, conveyors, industrial equipment, machine tools, hand power tools, etc.
Engineering Standards -
Conforms to ARPM IP-27 and ISO 13050 standard tolerances
Recommended Pulleys -
Use pulleys made to ARPM or ISO 13050 standards
Special Widths -
PLATINUM can be supplied in any width - available upon request
Silicone-Free Construction -
individually packaged - non-stock, made to order
The Next Generation Synchronous
Belt - 8M, 14M Parabolic RPC Tooth Profile
SYNCHRONOUS BELTS
POWERING GLOBAL INDUSTRY
ISORAN®
SYNCHRONOUS BELTS
47