52 / 84
Open-End - L8M, L14M, LXL, LL, LH, LXH
Double Sided Open-End - DL8M, DLL, DLH
Specially suitable for linear drives, accurate positioning, metering and reversing
applications. High load capacity, no maintenance cost and very low noise level make
these belts a perfect alternative to chain or cable reverse drives.
Double Sided - until now, chain was the only design option for drives requiring long spans
and
the capability to
drive from either side. The advantages of Open-End synchronous belts (no lubrication, no re-tensioning, high-speed
capabilities) makes such drives more versatile than ever.
Jason/Megadyne Open-End synchronous belting is specified by an "L" for long length, the belt pitch code and the
width code (i.e. L8M-20). Length is specified in feet. Double Sided Open-End is specified "DL" and followed by pitch
code and width code (e.g. DLH075 is Double Sided 1/2" pitch, 3/4" wide). Length is specified in feet. Consult
Jason/Megadyne for roll lengths. Minimum order quantity is 50 feet.
L8M-20
L =
Long length/open-end
8M =
Tooth pitch - 8M = 8mm
20 =
Belt width - 20 = 20mm
PART NUMBER DESIGNATIONS
DLH075
D =
Double sided
L =
Long length/open-end
H =
Tooth pitch - H = 1/2"
075 =
Belt width - 075 = 3/4"
Single Sided Open-End Timing Belts - Trapezoidal*
Belt Pitch Width Width Max. Roll Lbs.
Type (inch) Code (inch) Length (ft.) per ft.
LXL
1/5 025 1/4 800.0 0.015
LXL
1/5 031 5/16 670.0 0.018
LXL
1/5 037 3/8 540.0 0.020
LXL
1/5 050 1/2 400.0 0.027
LXL
1/5 075 3/4 300.0 0.040
LL
3/8 037 3/8 360.0 0.022
LL
3/8 050 1/2 265.0 0.030
LL
3/8 075 3/4 170.0 0.045
LL
3/8 100 1 125.0 0.060
LL
3/8 150 1.5 80.0 0.090
LL
3/8 200 2 55.0 0.120
LH
1/2 037 3/8 750.0 0.042
LH
1/2 050 1/2 550.0 0.056
LH
1/2 075 3/4 360.0 0.084
LH
1/2 100 1 260.0 0.113
LH
1/2 150 1.5 165.0 0.169
LH
1/2 175 1.75 115.0 0.198
LH
1/2 200 2 120.0 0.229
LH
1/2 300 3 70.0 0.339
LXH
7/8 075 3/4 Contact Jason 0.187
LXH
7/8 100 1 Contact Jason 0.250
Other widths available upon request. Minimum order 50 ft.
Lengths cut-to-order - 10% additional
Single Sided Open-End HTB® Belts*
Belt Pitch Width Max. Roll Lbs.
Type (mm) (mm) Length (ft.) per ft.
L8M
8 10.0 720.0 0.04
L8M
8 12.5 595.0 0.05
L8M
8 15.0 470.0 0.06
L8M
8 20.0 345.0 0.09
L8M
8 25.0 270.0 0.11
L8M
8 30.0 220.0 0.12
L8M
8 40.0 160.0 0.16
L8M
8 50.0 120.0 0.21
L8M
8 75.0 95.0 0.30
L8M
8 80.0 67.0 0.32
L8M
8 85.0 60.0 0.36
L14M
14 40.0 155.0 0.26
L14M
14 55.0 105.0 0.36
L14M
14 85.0 55.0 0.55
Other widths available upon request. Minimum order 50 ft.
Lengths cut-to-order - 10% additional
L5M (5mm pitch) also available upon request
*Spliced belts available on special order. Special constructions
and backings also available.
Double Sided - Width Codes - Standard Widths - Roll Lengths
Double
Roll
Roll
Roll Roll Roll Roll
Sided Pitch Width Length Width Length Width Length Width Length Width Length Width Length
Belt Type
(ft.)
(ft.)
(ft.)
(ft.)
(ft.)
(ft.)
DLL
3/8 0.50 265.0 0.75 170.0 100 125.0 - - - - - -
DLH
1/2 0.50 455.0 0.75 295.0 100 215.0 150 135.0 200 95.0 - -
DL8M
8mm 15mm 470.0 20mm 345.0 25mm 270.0 30mm 220.0 50mm 120.0 85mm 60.0
Width of up to 8" available in H and 8mm pitch for lengths up to 300 ft.
SYNCHRONOUS BELTS
POWERING GLOBAL INDUSTRY
OPEN-END
SYNCHRONOUS BELTS
50