396 / 961
Pneumatic
Accessories
G
DPL418
877.963.4966 •
dixonvalve.com394
G
Wilkerson FRL's
L28 EconOmist
®
Standard Lubricators
with metal bowl
Features:
•
6.11 oz. bowl
•
manual drain
•
high flow capacity
•
can be filled under pressure
•
To adjust and set oil delivery rate the unit must be pressurized and air must be flowing
through the unit. Turn the sight dome, located on the top of the unit, counter clockwise
to initiate oil delivery. If flow increases or decreases, the oil delivery rate will increase or
decrease proportionally. Turning the sight dome clockwise will stop all oil delivery.
•
maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F
(0°C
to
52°C)
- metal bowl:
250 PSIG
(17.2 bar) and
32°F
to
150°F
(0°C
to
66°C)
Size Flow
(SCFM)
Transparent Bowl
Part #
Metal Bowl
Part #
⅜" 176
L28-03A
L28-03AMB
½" 184
L28-04A
L28-04AMB
¾" 200
L28-06A
L28-06AMB
L30 EconOmist
®
Standard Lubricators
with metal bowl
Features:
•
26 oz. bowl
•
transparent bowl: no drain
metal bowl: manual brass petcock drain
•
can be filled under pressure
•
The rate of oil delivery may be controlled by turning the adjusting screw counter clockwise
for more and clockwise for less oil delivery. The oil delivery rate will change automatically to
deliver more oil during higher air flows and less oil for air flows lower than the one at which
the setting was made.
•
maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F (0°C
to
52°C)
- metal bowl:
200 PSIG
(13.8 bar) and
32°F
to
150°F
(0°C
to
66°C)
Size Flow
(SCFM)
Transparent Bowl
Part #
Metal Bowl
Part #
¾" 196
L30-06A
L30-06AMB
1" 374
L30-08A
L30-08AMB
SCFM ratings at 120 PSIG inlet pressure.
See pages 401 to 405 for accessories.
See page 367 for air tool lubricant.
FRL's are designed for air service only, unless otherwise indicated.
SCFM ratings at 150 PSIG inlet pressure.