58 / 60
WARNING
DO NOT USE THE PRODUCTS IN THIS GUIDE IN AIRCRAFT
APPLICATIONS. THE PRODUCTS IN THIS GUIDE ARE NOT
INTENDED FOR USE IN AIRCRAFT APPLICATIONS.
DO NOT USE THE PRODUCTS IN THIS GUIDE IN LIFT OR
BRAKE SYSTEMS WHICH DO NOT HAVE AN INDEPENDENT
SAFETY BACKUP SYSTEM. THE PRODUCTS IN THIS GUIDE
ARE NOT INTENDED FOR USE IN LIFT OR BRAKE SYSTEMS
WHICH DO NOT HAVE AN INDEPENDENT SAFETY
BACKUP SYSTEM.
FAILURE TO FOLLOW THESE WARNINGS AND THE PROPER
PROCEDURES FOR SELECTION, INSTALLATION, CARE,
MAINTENANCE AND STORAGE OF BELTS MAY RESULT IN
THE BELT’S FAILURE TO PERFORM PROPERLY AND MAY
RESULT IN DAMAGE TO PROPERTY AND/OR SERIOUS INJURY
OR DEATH.
The products in this guide have been tested under controlled laboratory
conditions to meet specific test criteria. These tests are not intended to
reflect performance of the product or any other material in any specific
application, but are intended to provide the user with application guidelines.
The products are intended for use by knowledgeable persons having the
technical skills necessary to evaluate their suitability for specific applications.
Continental ContiTech assumes no responsibility for the accuracy of this
information under varied conditions found in field use. The user has
responsibility for exercising care in the use of these products.
Notice on static conductivity: Drive conditions and service variables in
combination with time in operation can result in loss of static conductivity.
It is recommended that a conductivity check be added to drive preventative
maintenance programs where belt static conductivity is a requirement.
For more information on static conductivity, visit us at
www.contitech.us.
Power Transmission Belt Drive System
1