Goodyear Rubber Products

Click Here to open this page in a new window.

SHAFT  MOUNTED  ASSEMBLIES                                                                                                    HOUSED  COMPONENTS
   SHRINK FIT                                                                                                                                                                 SLIP FIT
                                                                                                                                        609TMor 641TM
                                                                                                                         Shaft
                                                                                                                               609TM or 641TM                                Housing
                                                                                                           ORIGINAL
                                                                                                          1.   Select component to fit shaft.
                                                                                                          2.   Machine to reduce component O.D. or increase housing I.D. to permit
  ASSEMBLY
                                                                                                               approximate .002"-.004" diametral slip fit.
  1.   Clean the shaft O.D. and component I.D.
                                                                                                          3.   Clean all parts with Loctite� ODC-Free Cleaner & Degreaser and spray
  2.   Cool the shaft to cause contraction, or heat the component to
                                                                                                               with Loctite� 7649TM Primer NTM.
       cause expansion.
                                                                                                          4.   Apply Loctite� 609TM or 641TM Quick Metal� Retaining Compound to
  3.   Apply a brush film of Loctite� 641TM Retaining Compound to the
                                                                                                               component O.D.
       shaft or lower temperature part.
                                                                                                          5.   Install component. Do not rotate.
  4.   Install component and allow temperatures to equilibriate.
                                                                                                          6.   Wipe off excess.
  5.   Wipe off excess.
                                                                                                          7.   Allow five minutes prior to service.
       Note:  Loctite� 641TM Retaining Compound will add lubricity for
              easier assembly while sealing and protecting the bond area
              from environmental exposure and filling gaps for a more                                      WORN
              complete contact area.
                                                                                                          Procedures identical to original slip fit, except:
                                                                                                          1.   Determine the maximum radial gap.
                                                                                                          2.   If the maximum gap exceeds .005", Loctite� 7649TM Primer NTM
                                                                                                               must be used.
                                                                                                          3.   Take steps to maintain concentricity on large gaps.
                                                                                                          4.   Large gaps require longer cure times (30-60 minutes).
                                                                                                          5.   Loctite� 660TM Quick Metal� Retaining Compound is NOT recommended
                                                                                                               for radial gaps exceeding .010".
                                                                                                          6.   See procedure for BADLY WORN HOUSING page 24.
22                                                                                                                                                                                         23

CALL TOLL FREE
IN THE USA
1-866-711-4673

INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE

CALL TOLL FREE IN THE USA 1-866-711-4673

INTERNATIONAL SALES CALL +1-727-342-5086 WE SHIP WORLDWIDE

CALL TOLL FREE
IN THE USA
1-866-711-4673

INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE