Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
STRENGTHEN KEYED ASSEMBLIES STRENGTHEN KEYED ASSEMBLIES STANDARD DUTY HEAVY DUTY Dab 660TM Quick Metal� or 2440TM here Dab 660TM Quick Metal� or 2440TM here 660TM Quick Metal� Coating Here 660TM Quick Metal� Coating Here Dab 660TM Quick Metal� Here ASSEMBLY ASSEMBLY 1. Clean all parts with Loctite� ODC-Free Cleaner & Degreaser. 1. Clean all parts with Loctite� ODC-Free Cleaner & Degreaser. 2. Apply a Loctite� 660TM Quick Metal� Retaining Compound coating 2. If necessary, spray all parts (I.D. and O.D.) with Loctite� 7649TM Primer NTM. around shaft, into keyway, and on key. 3. Apply Loctite� 660TM Quick Metal� Retaining Compound coating into 3. Assemble parts. Wipe off excess. keyway and on key. 4. Apply a Loctite� 660TM Quick Metal� Retaining Compound dab to screw. 4. Apply dab(s) of Loctite� 660TM Quick Metal� Retaining Compound onto 5. Tighten set screw. shaft opposite keyway or evenly spaced around shaft. 6. Allow 30 minutes prior to service. 5. Assemble parts. Wipe off excess. Note: � If gap exceeds .005", use Loctite� 7649TM Primer NTM on 6. Apply Loctite� 660TM Quick Metal� Retaining Compound dab to set screw. appropriate area (shaft or keyway). 7. Tighten set screw. � Loctite� 660TM Quick Metal� Retaining Compound is NOT 8. Allow 5-10 minutes prior to service. recommended for radial gaps exceeding .010" on shaft Note: � Loctite� 660TM Quick Metal� Retaining Compound is NOT or keyway. recommended for radial gaps exceeding .010" on shaft � See REPAIRING BADLY WALLOWED KEYWAY for procedure or keyway. page 18. � See REPAIRING BADLY WALLOWED KEYWAY for procedure page 18. DISASSEMBLY 1. Tap component and key with hammer. DISASSEMBLY 2. If necessary, apply localized heat (450�F for five minutes). 1. Tap component and key with hammer. 3. Pull while hot. 2. Pull as usual. 16 17
Goodyear Rubber Products
