Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Specification Sheet � Single Jacket 500 Pound Test � Rubber Lined � 1", 11/2", 13/4", 2", 2 1/2", 3" A valid U.S. Underwriters inspection procedure shall be in a Scope force at the time of bid. Quality: The fire hose assembly supplied under this spec- a ification shall be constructed with superior quality materi- Hydrostatic Testing als. NFPA 1961 standards shall be observed in production Stock Lengths: Standard lengths are 50, 75 and 100 feet. of the assembly, in order to ensure its quality and durability. 1 3 1 Size 1" 1 /2" 1 /4" 2" 2/2" 3" Service Life: Hose furnished under these specifications Part Numbers SP10-500SP15-500SP17-500SP20-500SP25-500SP30-500 will have a potential service life warranty of not less than Test Pressure 500psi 500psi 500psi 500psi 500psi 400psi five years; barring mistreatment that would render it Elongation 4% 5% 6% 6% 7% 8% unfit for service. Upon delivery, the hose shall be free from Twist per foot 71� right 64� right 64� right 64� right 25� right 25� right defects in workmanship and materials. Any defective hose Warp 10" 10" 10" 10" 10" 10" will be replaced at no charge. Rise 4" 3" 2" 1" 0 0 Burst Test 800psi 800psi 800psi 750psi 750psi 750psi a Jacket Construction Kink Test 500psi 400psi 350psi 350psi 350psi 300psi The jackets will be woven evenly and be free of defects, a Finished Hose including knots, lumps, or unsightly disfigurations that could jeopardize the integrity of the hose assembly. The Markings: Beginning at a point not less than four feet warp yarn shall consist of staple polyester yarn. The use of from the end, each fifty foot section shall be stencilled filament or entangled yarn is expressly forbidden due to in indelible ink with letters at least one inch high stat- the lack of inherent abrasion resistance. The filler yarns ing the name of the manufacturer, month and year of shall be constructed of high strength, low elongation, fila- manufacture, and service test to 250 PSI per NFPA ment polyester to reduce weight and increase flexibility. 1962. The ink used will be of a contrasting color. Methods of Testing: All measurements and tests nec- a Abrasion Impregnation essary to determine compliance of the fire hose specified requirements shall be made with ASTM, UL and NFPA Hose assemblies are available with polymer impregnation 1961 designation, unless otherwise prescribed. that provide additional abrasion resistance. Colors include: yellow, orange, red, tan, black, blue and green. Color shall a Weights and Measures be pure and even in each hose. Impregnated hose shall meet 1 3 1 Size 1" 1 /2"* 1 /4"* 2"* 2 /2"* 3" the requirements of Mil-H-24606B for abrasion resistance. Part Numbers SP10-500 SP15-500 SP17-500 SP20-500 SP25-500 SP30-500 Bowl Size 11/ " 1 3/" 115 3/ 13 3 4 4 /16" 2 8" 2 /16" 3 /8" a Lining Weight per 50' length 9 lbs. 13 lbs. 18 lbs.21 lbs. 24 lbs. 32 lbs. Uncoupled The rubber lining shall be a single-ply extruded tube of Weight per 50' length 11 lbs. 14 lbs. 19 lbs. 22 lbs. 25 lbs. 35 lbs. synthetic EPDM compounded to resist ozone. The fin- Coupled *Available with a UL label add-on. ished form shall be free of pits or other imperfections and have a smooth finish. No reclaimed rubber shall be used. a Couplings Plastic tubes that sacrifice durability of the hose life for the As required by purchaser, expansion ring threaded, STORZ sake of weight are not acceptable. clamp ring, etc. Backing: The backing shall be of adequate thickness to Key Fire Hose reserves the right to modify any specification create a smooth waterway but not greater than .020. The without prior notice to meet or exceed changing standards. fire hose constructed under this specification shall be man- Customers are advised that special diameters or construction ufactured fully backed. characteristics can be produced on special request. For more Tensile Strength & Ultimate Elongation: Shall meet the standards of Underwriters Laboratories, Inc.TM as information, please contact your Key Fire Hose Corporation well as all other properties of UL-19 for rubber lined hoses. authorized distributor. KF-007 02/04
Goodyear Rubber Products
