Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Specification Sheet � Single Jacket 300 Pound Test � Rubber Lined � 11/2", 2", 21/2", 3", 4" a Scope a Hydrostatic Testing Quality: The fire hose assembly supplied under this spec- Stock Lengths: Standard lengths are 50, 75 and 100 feet. ification shall be constructed with superior quality materi- 1 1 Size 1/2" 2" 2 /2" 3" 4" als. NFPA 1961 standards shall be observed in production Part Numbers SP15-300 SP20-300 SP25-300 SP30-300 SP40-300 of the assembly, in order to ensure its quality and durability. Test Pressure 300psi 300psi 300psi 300psi 300psi Service Life: Hose furnished under these specifications Elongation 5% 6% 7% 8% 8% will have a potential service life warranty of not less than Twist per foot 64� right 64� right 25� right 25� right 20� right five years; barring mistreatment that would render it unfit for service. Upon delivery, the hose shall be free from Warp 10" 10" 10" 10" 10" defects in workmanship and materials. Any defective hose Rise 3" 2" 1" 0" 0" will be replaced at no charge whatsoever. Burst Test 650psi 650psi 650psi 550psi 500psi Kink Test 300psi 300psi 300psi 300psi 300psi a Jacket Construction a The jackets will be woven evenly and be free of defects, Finished Hose including knots, lumps, or unsightly disfigurations that Markings: Beginning at a point not less than four could jeopardize the integrity of the hose assembly. The feet from the end, each fifty foot section shall be sten- warp yarn shall consist of staple polyester yarn. The use of cilled in indelible ink with letters at least one inch filament or entangled yarn is expressly forbidden due to high stating the name of the manufacturer, month the lack of inherent abrasion resistance. The filler yarns and year of manufacture, and service test to 150 PSI shall be constructed of high strength, low elongation, fila- per NFPA 1962. The ink used will be of a contrasting ment polyester to reduce weight and increase flexibility. color. Methods of Testing: All measurements and tests a Abrasion Impregnation necessary to determine compliance of the fire hose spec- Hose assemblies are available with polymer impregnation ified requirements shall be made with ASTM, UL and that provide additional abrasion resistance. Colors include: yellow, orange, red, tan, black, blue and green. Color shall NFPA 1961 designation, unless otherwise prescribed. be pure and even in each hose. Impregnated hose shall meet a Weights and Measures the requirements of Mil-H-24606B for abrasion resistance. 1 1 Size 1 /2"* 2"* 2/2"* 3"* 4"* a Lining Part Numbers SP15-300 SP20-300 SP25-300 SP30-300 SP40-300 Bowl Size 113/16" 2 3/8" 213/16" 33/8" 43/8" The rubber lining shall be a single-ply extruded tube of Weight per 50' length 11 lbs. 15 lbs. 23 lbs. 25 lbs. 37 lbs. synthetic EPDM compounded to resist ozone. The fin- Uncoupled Weight per 50' length ished form shall be free of pits or other imperfections and 13 lbs. 16 lbs. 24 lbs. 27 lbs. 41 lbs. Coupled have a smooth finish. No reclaimed rubber shall be used. *Available with a UL label add-on. Plastic tubes that sacrifice durability of the hose life for the a sake of weight are not acceptable. Couplings Backing: The backing shall be of adequate thickness to As required by purchaser, expansion ring threaded, STORZ create a smooth waterway but not greater than .020. The clamp ring, etc. fire hose constructed under this specification shall be man- Key Fire Hose reserves the right to modify any specification ufactured fully backed. without prior notice to meet or exceed changing standards. Tensile Strength & Ultimate Elongation: Shall Customers are advised that special diameters or construction meet the standards of Underwriters Laboratories, Inc.TM as characteristics can be produced on special request. For more well as all other properties of UL-19 for rubber lined hoses. information, please contact your Key Fire Hose Corporation A valid U.S. Underwriters inspection procedure shall be in force at the time of bid. authorized distributor. KF-003 02/04
Goodyear Rubber Products
