Tapco Elevator Buckets and Bolts GoodyearBelting.com 866-711-4673

88 / 103

88 Tel: +1.314.739.9191 • +1.800.288.2726 • Fax: +1.314.739.5880 •
Bucket Elevator SPECIFICATION FORM
1 of 2
1. Current Bucket Size:_________________________________________
2. Current Bucket Style:_____________________Material____________
3. Bucket Manufacturer:________________________________________
4. Bucket Spacing on Belt:______________________________________
5. Number of Bucket Rows:_____________________________________
6. Product Being Elevated:______________________________________
7. Product Density (Cubic Foot):_________________________________
8. Moisture Content :_________________________________________
9. Oil or Fat Content:___________________________________________
10. Particle Size:______________________________________________
11. Product Temperature:_______________________________________
12. Head Pulley Diameter:______________________________________
13. Head Pulley Face Width:____________________________________
14. Head Shaft Diameter:_______________________________________
15. Head Shaft RPM:__________________________________________
16. Motor Horsepower:_________________________________________
17. Boot Pulley Diameter:_______________________________________
18. Feed Inlet, Up or Side:______________________________________
19. Feed Inlet, Opening Dimensions:_____________________________
20. Bucket Elevator Manufacturer:_______________________________
21. Required Capacity:_________________________________________
22. Current Capacity:__________________________________________
Company:________________________________________Contact:____________________________
Address:_____________________________________________________________________________
Phone:_____________________Fax:_____________________E-mail:___________________________
Up-Leg Bonnet
Down-Leg Discharge
Bonnet w/ Internal Wear
Liner
Head Shaft and
Bearing
Head Section
Discharge Throat
and Throat Plate
Elevator Belt and
Buckets
Elevator Leg Casing
and Trucking
Boot
Section
Up-Leg Inlet
Hopper
Boot Shaft and
Take-Up Bearing
Boot Clean-Out slide
Head Pulley
Inspection
Door