69 / 360
68
2015 Power Transmission Products
Synchronous
Ba ded
Matchmaker® performance
Our Matchmaker® technology results in belt consistency run
to run. That means each HY-T® Wedge Torque Team® is equal
in size and performance to every other HY-T® Wedge Torque
Team® belt in that size, no matter when or where it
was produced.
By eliminating mismatch problems, there is no costly and
complicated belt matching to get a drive back on line; no
problems with belts that are too tight or too loose.
Available in the most extensive stock line
in the industry
HY-T® Wedge Torque Team® belts are available from stock in
any number of belts per team, up to the number of ribs
indicated. Nonstock lengths are also available in these rib
counts, up to a maximum of 730 inches (180 inches for
3V cross sections).
Envelope 5V, 8V Cross Section
Cut Edge 3VX, 5VX Cross Section
Cut Edge Side View
Applications
For shock load applications. Ideal for pulsating loads, high
capacity drives and for short-center, heavy-duty drives.
Key features & benefits
›
Narrow profile ribs provide savings through efficiency.
›
Joined construction for problem drives.
›
Strong Vytacord® tensile members.
›
Tough fabric backing.
›
Oil, heat, ozone and abrasion resistant.
›
Available in raw edge construction with cogs or
envelope construction.
›
Matchmaker® to eliminate mismatch.
›
Static conductive.*
*Drive conditions and service variables in combination with time in
operation can result in a loss of static conductivity. It is recommended
that a conductivity check be added to drive preventive maintenance
programs where belt static conductivity is a requirement.
Overview
Synchronous
Banded
V-Belt
Bushing Hardware
Specialty
Automotive & Truck
General Information