62 / 360
2015 Power Transmission Products
Synchronous
61
Acculinear
®
Belts and Sprockets
Sprockets
Acculinear® Sprockets for the polyurethane belt line are
available for all eight belt widths in a wide range of diameters.
The Acculinear® product shares the same sprockets as the
rubber SilentSync® product. The only exception is with the “M”
(25mm width) and the “L” (50mm width) sprockets. These two
widths are stocked in aluminum and are offered in a limited size
range. All other sprocket widths are stocked either in ductile
or cast iron. Refer to the “Acculinear® Sprocket” section for
more information.
Special belt constructions
In addition to the standard belt construction (polyurethane
backing material), Acculinear® is available in a variety of special
constructions. Several materials can be applied to the back
of the belt to enhance its performance in specific drive envi-
ronments. These backing materials are typically used when
special characteristics are required on the back of the belt to
transfer specific materials in conveyor applications.
A number of special backings are available on request. Refer to
the appropriate engineering manual or to the website for more
information on these special backings.
1:
Y –
8 –
PU –
16
2:
M –
8 –
PU –
25
3:
W –
8 –
PU –
32
4:
L –
8 –
PU –
50
5:
B –
14 –
PU –
35
6:
G –
14 –
PU –
52.5
7:
0 –
14 –
PU –
70
8:
R –
14 –
PU –
105
Alphabet Designation
Denotes belt width.
Example: Y = 16mm wide belt
Belt Pitch
(8mm and 14mm)
PU
for Polyurethane
Belt Width
in mm
}
State
“Open End”
or “Spliced”
State
Belt
Pitch Length
State
Belt
Construction
Available in eight standard widths
(in 8mm and 14mm pitch configurations)
Sample Part Number
Y - 8 - Pu - 16 - Std
Belt Type: Open End Pd®
Belt Length: 800mm
Y
= Acculinear® 16mm wide belt
8
= 8mm pitch
PU
= Polyurethane
16
= Belt width, in mm
STD
= Belt construction (STD = Standard construction)
General Information
Automotive & Truck
Specialty
Bushing Hardware
V-Belt
Banded
Synchronous
Overview