644 / 961
Sanitary
Fittings
J
647
DPL418
877.963.4966 •
dixonvalve.comJ
Actuation: Pneumatically Actuated
Pneumatically Actuated Brass Ball Valves
Features:
2-Piece Brass Ball Valve
•
body: ¼ " to 2" brass, 2½" - 4" bronze
•
seats: PTFE
•
ends: FNPT
•
brass ball
•
FKM elastomers
•
blow-out proof stem
•
PTFE seats with double O-ring stem packing
•
ISO 5211 mounting pad
•
pressure rating: -
600 PSI
WOG,
150 PSI
WSP
•
maximum temperature:
300°F (149°C)
Rack and Pinion Actuator
•
body: hard anodized aluminum
•
anti-blowout pinion: nickel plated
•
O-rings: Buna-N
•
NAMUR mounting
•
bi-directional stops for ±5º travel adjustment
•
80 PSI plant air required
•
visual position indication
•
maximum operating pressure:
120 PSI
•
temperature range:
-40ºF
to
200ºF (-40°C
to
93°C)
•
tested to one million cycles
•
for spring return actuators must note fail position
A wide variety of options are available: spring return (normally closed) and double acting actuators, switches, solenoids,
positioners, etc. Contact Dixon Sanitary at 800.789.1718.
Even though there are torque safety factors built into our automated ball valve packages, actual service conditions
must also be considered when selecting the proper product for the appropriate application.
For example: Severe service conditions such as dirty water, dirty air, all slurries, raw sewage water, oils, and other
viscous fluids can have a dramatic affect in raising the torque requirements of ball valves as much as 75% and
therefore larger actuators may be required. Please consult Dixon
®
when dealing with these types of applications.