361 / 972
G-77
Pneumatic Fittings
DPL417
877.963.4966 •
dixonvalve.comG
Wilkerson EconOmist
®
Compact Lubricators L18
FRL's
Flow Guide
®
The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and
automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of
airflow. This allows one lubricator to serve several pneumatic components operating together
or intermittently.
Type of oil to use:
For all Wilkerson lubricators, use any petroleum-base, non-detergent light weight oil (SAE
10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil. Do
not use synthetic oil or any oils containing additives or solvents. See page G-51 for air tool
lubricants.
with metal bowl
Features:
•
4.09 oz. bowl
•
manual drain
•
high flow capacity
•
can be filled under pressure
•
To adjust and set oil delivery rate the unit must be pressurized and air must be flowing
through the unit. Turn the sight dome, located on the top of the unit, counter clockwise to
initiate oil delivery. The rate of oil delivery depends on air flow rate. If flow increases or
decreases, the oil delivery rate will increase or decrease proportionally. Turning the sight
dome clockwise will stop all oil delivery.
•
maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F (0°C
to
52°C)
- metal bowl:
250 PSIG
(17.2 bar) and
32°F
to
150°F
(0°C
to
66°C)
Size Flow
(SCFM)
With Transparent Bowl
With Metal Bowl
Part #
Price/E
Part #
Price/E
¼"
88
L18-02A
$121.05
L18-02AMB
$132.15
⅜"
90
L18-03A
121.05
L18-03AMB
132.15
½"
96
L18-04A
121.05
L18-04AMB
132.15
Wilkerson EconOmist
®
Standard Lubricators L26
with metal bowl
Features:
•
10 oz. bowl
•
adjustable oil feed
•
can be filled under pressure
•
quick-disconnect metal bowl guard with integral safety latch
•
siphon tube filter provides clean lubricant downstream
•
The rate of oil delivery may be controlled by turning the adjusting screw counter clockwise for
more and clockwise for less oil delivery. If flow increases or decreases, the oil delivery rate
will increase or decrease proportionally.
•
maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F
(0°C
to
52°C)
- metal bowl:
200 PSIG
(13.8 bar) and
32°F
to
150°F
(0°C
to
66°C)
1
metal bowl has sight gauge with brass petcock drain
Size Flow
(SCFM)
With Transparent Bowl
With Metal Bowl
1
Part #
Price/E
Part #
Price/E
¼"
35
L26-02A
$195.05
L26-02AMB
$215.00
⅜"
60
L26-03A
195.05
L26-03AMB
215.00
½" 128
L26-04A
195.05
L26-04AMB
215.00
SCFM ratings at 150 PSIG inlet pressure.
See pages G-85 to G-89 for accessories.
See page G-51 for air tool lubricant.
FRL's are designed for air service only, unless otherwise indicated.