177 / 235
www.dklok.com
Valves
DK-LokTubeFittingCerti cationListing
DK-LokValveCerti cationListing
QualitySystemApprovals
No.VH86-5
July 2013
VH86 Series
High Pressure Multi Purpose Ball Valves
Features
Material of Construction
Operation and Packing Adjustment
Application
Factory Test, Cleaning and Packaging
• VH86 valves are designed to control fluid in full open and closed position, using VH86 valves to throttle the flow may reduce the
valve life.
• Stem packing can be adjustable with the handle disassembled. Tighten packing bolt clockwise to tighten the stem packing.
• Valves that have not been actuated for a period of time may have a higher initial actuation torque.
• If the valve system needs to be tested at higher pressure than the valve maximum pressure, the valve must be in open position
during the test so as not to damage the valve seat.
• Optional Sour Gas Service applicable.
VH86 series ball valve offers a safe and reliable performance in a wide range of onshore and offshore applications: Water, oil, gas,
petrochemical in heavy duty applications.
• Every valve is factory tested with nitrogen gas at 1,000 psig (68.9 bar) for leakage at seat to a maximum allowable leak rate of
0.1 SCCM. The packing is tested with nitrogen gas for no detectable leakage.
• Every valve is cleaned and packaged in accordance with DK cleaning standard DC-01.
Components
Valve Body Material Stainless Steel Grade/ASTM Specification
1. Handle
Nylon with brass insert
2. Set Screw
Stainless steel
3. Panel Nut
SS316/A276
4. Packing bolt*
5. Upper / Lower Gland
6. Stem Chevron Packing
PTFE/D1710 type 1, Grade 1, Class B
7. Stem
SS316/A276
8. Body
SS316/A182 Type F316
9. Ball
SS316/A276
10. Seat (2)
Standard PCTFE (Kel-F), optional PTFE, PEEK
11. Retainer (2)
SS316/A276
12. Retainer Seal (2)
PTFE/D1710 type 1, Grade 1, Class B
13. End Connector Seal (2)
14. End Connector (2)
SS316/A276
* Molybdenum disulfide with hydrocarbon coating
• Wetted parts and lubricants are listed in
blue
.
• Lubricant is Fluorinated-based.
• High flow in a compact design.
• High pressure capacity designed for blow-out proof with internally loaded ball stem.
• Micro-finished ball provides a positive seal.
• 90 degree actuation for 2-way and 180 degree actuation for 3-way ball valves.
• Panel mounting as standard.
• Chevron stem seal, adjustable with the handle disassembled.
• Handle indicates flow direction.
• Low operating torques and positive handle stops.
• Optional pneumatic actuation.