FABRICATION
HEAVY-DUTY PROFILES & CLEATS
CUSTOM CHEVRON CLEATS
Below are examples of some of our most popular designs — we have over 150 patterns available but can
customize them to your specific needs. Heights normally range from 1/4" to 1-1/2" to prevent rollback.
Normal incline angles range from 15-35 degrees depending on material conveyed and surcharge angle.
Chevron cleats are also used on flat idlers as well as metal beds or pan conveyors.
45"–62"
30"–54"
TEMPLATE #34
1" Height x 2" Width
45" to 62"
TEMPLATE #35
1/2'' x 1/2'' Square
30'' to 54''
TEMPLATE #38
1/2'' x 1/2'' Square
Chevron
TEMPLATE #39
1/2'' x 1/2'' Square
Chevron
TEMPLATE #36
1/2'' x 1/2'' Rect. Cleats
for 44'' or Wider Belts
TEMPLATE #37
1/2'' x 1/2'' Square
Herringbone 12''
to 44''
TEMPLATE #8
1/2'' x 1/2'' Square
U-shaped Cleats
TEMPLATE #8A
1/2'' x 1/2'' Square
U-shaped Cleats
TEMPLATE #8B
1/2'' x 1/2'' Square
U-shaped Cleats
TEMPLATE #32
3/8'' x 3/8''
Closed Chevrons
to 28'' Wide
TEMPLATE #40
1/2'' x 1/2'' Square
Chevron
TEMPLATE #6
1/2'' x 1/2'' Square
Chevron
STEEP CLIMBERS
™
CLEAT PATTERNS
Apache | Trico Industrial Division’s Steep Climber
™
hot vulcanized rubber cleats are specifically designed for the
larger material and steeper incline angles used in troughing systems. This versatile and durable cleat pattern
comes in four (4) widths: 13-27". Cleat spacing is 10" to ensure smooth running on return idlers.
27"
6"
10"
4"
13¼"
¾"
¾"
7¼"
21"
6"
10"
4"
¾"
¾"
17"
6"
10"
4"
3¼"
¾" ¾"
13"
6"
10"
4"
¾"
RULE OF
THUMB:
Cleat height
should be
approximately
1/2 to 2/3 of
the material
size for uniform
bulk material
(such as sand
and grain)