Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
HOSE SELECTION Titan suggests using the "STAMPED" guide to assist in determining the correct hose, coupling, and attachment method when selecting a hose. S SIZE: I.D., O.D. and length of hose that is required. T TEMPERATURE: Temperature of the material being conveyed. A APPLICATION: Conditions of use for the hose. M MATERIAL: Type and concentration of material being conveyed. P PRESSURE: Working pressure for which the hose assembly will be exposed. E ENDS: Style, type, and attachment method of end fittings. D DELIVERY: Testing, packaging, and delivery requirements. You can extend the life of your hose by... You will reduce the life of your hose by... � Choosing the appropriate hose for the job. In addition � Using the hose to move materials it was not designed to multi-purpose hoses, Titan offers hoses that are to convey. specifically designed for critical applications. � Exceeding the hose's maximum working temperature and pressure. � Selecting the proper length of hose and keeping the hose from high traffic areas. � Leaving product trapped in the hose for prolonged periods of time. � Inspecting the hose before each use especially in critical applications. Inspect for coupling movement, kinks, � Exceeding the hose's minimum bend radius. cover perforations, soft spots or any other visible � Not using proper adapters where necessary. damage. � Dragging the hose over rough surfaces. � Storing the hose in a cool, dry place off of the ground. Keeping the hose out of direct sunlight. Safety � Draining and cleaning the hose after each use. Special note: Working pressures are recommended in accordance with RMA design safety factors at ambient � Pressure testing each hose at 150% of its working temperatures. Do not operate outside hose temperature pressure at regular intervals. Testing intervals will limits. Even within hose temperature limits, end fittings and depend on frequency and critical nature of the hose size can impact performance at higher temperatures. For application. your safety, Titan recommends the following working pressure reductions at the following temperatures. � Using proper hose suspension equipment to ensure recommended curvature of the hose is not exceeded, 80� to 150�F Reduce working pressure by 15% and to provide an uninterrupted flow of material. 150� to 225�F. Reduce working pressure by 30% Over 225�F. Reduce working pressure by 50% Titan Industries continually strives to make design and material improvements and reserves the right to alter specifications without prior notice. 73
Goodyear Rubber Products
