Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
TM Axial Compression (Inches) Axial Extension (Inches) Lateral STYLEOffset (Inches) Axial Compression (Inches) 53 0 Axial Extension (Inches) ARCH-DESIGNLateral for ultra high movements Offset (Inches) PROCO Style530 Arch-TypeDuct Connectors: The leasteconomical ofthe integrally flanged Axial designs, the Style 530 is predominately used for applications whereCompression movements are large and face-to-face space is a premium.The duct connector is manufactured(Inches)in an Arch-Design configuration with a minimum of one (1) to two (2) plies of reinforced fabric vulcanized into Axial a homogeneous product that is 3/1/6", 1/4" or 3/8" thick. The flanges shall be an integral part Extension of the expansion joint. The Style 530 is manufactured with a premolded arch.(Inches) The arch continues through the corner and straight sections and shall be fully developed when in the neutralinstallation position. Listed belowis information regardingthe Style 530non-metallicLateral Offset duct connectors: (Inches) System Design Considerations: In designing the Series 500, Style 530 non-metallic duct connector, several considerations must be taken into account to ensure long lasting service. � System Media: The designer and/or requesting party should define the system me- dia to determine the correct elastomer for each application. Evaluation of the gas/air ItemApplicationSizeTemperaturePressureMovements composition should be madeduringdesign of thenon-metallic fan/duct connector. Abra- sion characteristics and external environment conditions should also be taken into ac- count when specifying the fabric element. � System Temperature: The system operating temperature is of primary importance to the design of a non-metallic fan/duct connector, although the system design is gener- ally specified. It is important to distinguish between operating and design as "design" can include a significant safety factor which may result in an upgraded material or de- sign selection. � System Pressure: Normal operating pressures and maximum pressures (positive and negative) under upset conditions should be specified. Combinations of pressures and temperatures should be specifically identified. � Movements: Movements consist of thermal growth resulting from both operating and upset conditions. Individual movements resulting from both conditions should be specified. Maximum installation misalignment should also be taken into account to de- termine if the non-metallic fan/duct connector design is capable of reacting to a combi- nation of the total maximum movements. Style 530 Available Materials Design Data Sheet Fan/Duct Connector - Style 530 ForSpecific Elastomer Recommendations, See: PROCOTM "Chemical To Elastomer Guide" Tag No.: PROCO Nominal No.of Maximum Maximum Styles Material Elastomer Body ReinforcementOperatingPressure Code Thickness Plies Temp �F Rating (PSI) Quantity: BB Chlorobutyl 300� EE EPDM 3/16" 1 300� �2 Equipment Adjacent HH Hypalon� 225� 530 The Connector: NH Neoprene/Hypalon� 1/4" 2 225� �3 NN Neoprene 212� Media: Gas or Air NP Neoprene/Buna-N 3/8" 2 212� �5 (circle one) G A VV Viton� 400� NOTES: 1. Hypalon and Viton are registered trademarks of DuDont Dow ElastomersLocation of Joint: 2. ExpansionJoint "Cover" (outside) can be Hypalon painted on special order.(Inlet, Discharge, Bypass) 3. Standard fabric reinforcement is polyester. Other high temperature materials are available upon request. 4. For vacuum applications, all fabric elements should retain sufficient setbackfrom the duct to ensure that belting does not protrude into the flow stream. Duct I.S. or Diameter: Non-Metallic Fan/Duct Connector Weight Face To Face: IN. (pounds per square foot of periphery) Nominal Elastomers Retaining Operating: Body Chloro- Rings/Bars �F � Neoprene/ Neoprene/ � Thickness butyl EPDM Hypalon Hypalon � Neoprene Buna-N Viton Linear/Foot 1/4" 1.6 1.6 1.8 1.8 1.8 1.8 2.5 Design: �F 3.5 3/8" 2.5 2.5 2.6 2.6 2.6 2.6 4.8 Operating: PSI Maximum Movement Capabilities 6" Face To Face 9" Face To Face 12" Face To Face Design: PSI Axial Compression: IN. Axial Extension: IN. 2.25 1.25 1.25 2.75 1.5 1.5 3.5 2.0 2.0 NOTES: 1. LateralOffsets shown above are based on movements prior to axialcompression. Greaterlateraloffsetmay be obtained ifthe fan/duct connector encounterssimultaneous compression.Lateral Offset: IN. 2. Axial extension may be increased by pre-compression of the fan/duct connectorduring installation. any pre- compressionof thefan/ductconnector will equally reduce theratedaxial compression movement.
Goodyear Rubber Products
