Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
233/223 continued EXPANSION Table 4: Sizes � Movements � Forces � Weights See Notes Below SIZEJOINT 4 5 Nom.I.D.x 233 / 223 Movement Capability: Spring Rate Capability Based on 1" ofOperating Weights (mm)/Inch From Neutral Position Movement at Zero Pressure ConditionsConditions lbs / (kgs) NEUTRAL LENGTH (mm)/Inch 4.7 2.4 2.4 18.9 2.0 210.18 130 26 48.5 27.0 20.0 14 (350) 20 (508) 233 EXPANSION(120) (61) (61) (1356) (9.0) (660) (22.0) (12.3) (9.1) STYLEJOINT 4.0 2.0 2.0 10.5 2.0 U 257.54 115 26 55.0 33.5 20.0 16 (406) 223 (102) (51) (51) (1662) (8.0) (660) (24.9) (15.2) (9.1) Axial N Compression 4.7 2.4 2.4 16.7 2.0 264.74 115 26 55.0 33.5 20.0 16 (400) 18 (457) 233 (mm)/Inch (120) (61) (61) D (1708) (8.0) (660) (24.9) (15.2) (9.1) Axial 4.7 2.4 2.4 16.7 2.0 E 264.74 115 26 55.0 33.5 20.0 20 (508) 233 Extension (120) (61) (61) (1708) (8.0) (660) (24.9) (15.2) (9.1) Inch/(mm) R 4.0 2.0 2.0 9.3 2.0 316.59 115 26 66.0 34.0 21.0 16 (406) 223 Lateral (102) (51) (51)Deflection (2043) (8.0) (660) (29.9) (15.5) (9.5) C Inch/(mm) 4.7 2.4 2.4 14.9 2.0 325.50 115 26 66.0 34.0 21.0 18 (450) 18 (457) 233 (120) (61) (61) 1 U (2100) (8.0) (660) (29.9) (15.5) (9.5) Angular DegreesDeflection 4.7 2.4 2.4 14.9 2.0 R 325.50 115 26 66.0 34.0 21.0 20 (508) 233 (120) (61) (61) (2100) (8.0) (660) (29.9) (15.5) (9.5) 2 Torsional R 4.7 2.4 2.4 13.5 2.0RotationDegrees 392.62 115 26 78.0 38.0 21.0 18 (457) 233 E (120) (61) (61) (2533) (8.0) (660) (35.4) (17.3) (9.5) 20 (500) lbsForce 4.7 2.4 2.4 13.5 2.0 per1"ratedN 392.62 115 26 78.0 38.0 21.0 20 (508) 233 (120) (61) (61) Compression (2533) (8.0) (660) (35.4) (17.3) (9.5) T 4.8 2.4 2.2 14.0 2.0 Forcelbs 562.82 100 26 91.5 48.0 32.0 18 (457) 223 (120) (61) (55) per1"rated (3631) (7.0) (660) (41.5) (21.8) (14.5) 24 (600) ExtensionT 6.0 3.0 2.7 14.0 2.0 562.03 100 26 91.5 48.0 32.0 20 (508) 233 E lbsForce (150) (75) (69) (3626) (7.0) (660) (41.5) (21.8) (14.5) 1"perrated S DeflectionLatreral 4.8 2.4 2.2 11.3 2.0 798.58 90 26 131.0 63.0 32.0 18 (457) 223 (120) (61) (55) (5152) (6.0) (660) (59.4) (28.6) (14.5) 30 (750) T ft-lbsForce �per1rated 6.0 3.0 2.7 11.3 2.0 Angular842.27 90 26 131.0 63.0 32.0 20 (508) 233 I (150) (75) (69) (5434) (6.0) (660) (59.4) (28.6) (14.5) N 4.8 2.4 2.2 9.5 2.0 1217.143 90 26 157.0 76.0 43.0 18 (457) 223 ThrustFactor (120) (61) (55) G (7873) (6.0) (660) (71.2) (34.5) (19.5) In2/(cm2) 36 (900) 6.0 3.0 2.7 9.5 2.0 1179.09 90 26 157.0 76.0 43.0 20 (508) 233 (150) (75) (69) (7607) (6.0) (660) (71.2) (34.5) (19.5) Positive PSIG/ Larger diameters available upon request. (Bar) Neutral lengths underlined are the recommended minimum lengths. m Vacuum Metric Conversion Formula: Nominal I.D.: in. x 25 = mm; Dimensions: in. x 25.4 = mm; Pressure: PSIG x .069 = Bar InchesofHg/ NOTES: (mmofHg) 1. The degree of angular movement is based on the maximum rated extension. 2. Torsional movement is expressed when the expansion joint is at neutral length. Expansion 3. To determine "end thrust", multiply thrust factor by operating pressure of system. Joint 4. Pressure rating is based on 170�F operating temperature with a 4:1 safety factor. At higher temperatures, the Assembly pressure rating is reduced slightly. Hydrostatic testing at 1.5 times rated or working pressure for 10 minutes is available upon request. Retaining 5. Weights are approximate and vary due to OAL. SetRing 6. Control rod unit weight consists of one rod with washers, nuts and two control rod plates. Multiply number of control rods needed for application (as specified in the Fluid Sealing Association's Technical Handbook) to determine correct weights. 6 Control RodAssembly Filled Arch Rubber Expansion Joints Known as Style FA233 or Style FA223, the Series FA230 Rubber Expansion Joints are designed to eliminate flow turbulence and collection of solids in the arch core. Filled Arch Rubber Expansion Joints can be found in applications such as sludge, slurries or other heavy solids where material entrapment, high flow velocity or high abrasion conditions exist. Filled arch products are FA233 manufactured with seamless tube and are built as an Triple Filled Arch integral part of the carcass. Although the tube is made of a low durometer filler stock, movement ratings of the Style FA233 or Style FA223 are 50% less than those Series 230 Page 11 of 16 movements listed in the table above. PROCO can manu- facture any size listed in the table above.
Goodyear Rubber Products
