Catalog 0600-FCGS-0106
Prep-Air
®
II
Air Preparation Units
! CAUTION:
Polycarbonate bowls, being transparent and tough, are ideal for use with Filters and Lubricators. They are suitable for use in normal
industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, nor
temperatures outside of the rated range. As with most plastics, some chemicals can cause damage. Polycarbonate bowls should not
be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols. They should not be used in air systems where
compressors are lubricated with fire-resistant fluids such as phosphate ester and di-ester types.
Metal bowls are recommended where ambient and/or media conditions are not compatible with polycarbonate bowls. Metal bowls
resist the action of most such solvents, but should not be used where strong acids or bases are present or in salt laden atmospheres.
Consult the factory for specific recommendations where these conditions exist.
TO CLEAN POLYCARBONATE BOWLS USE MILD SOAP AND WATER ONLY! DO NOT
use cleansing agents such as acetone,
benzene, carbon tetrachloride, gasoline, toluene, etc., which are damaging to this plastic.
Metal bowl guards are recommended for all applications.
!
CAUTION:
REGULATOR PRESSURE ADJUSTMENT –
The working range of knob adjustment is designed to permit outlet pressures within their
full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common
characteristic of most industrial regulators, and limiting devices may be obtained only by special design.
7
Parker Hannifin Corporation
Pneumatic Division North America
Richland, Michigan
Prep-Air
®
II
