Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Catalog 4400 USFerrule-Fix Technical A Ferrule-Fix pplication A Fast, on-the-job repair for ruptured bent tube hose assemblies and power steering lines. � Eliminates the need for emergency brazing or The life of the combination tube-hose assembly is often limited to the welding in the field - Ferrul-Fix can be assembled service life of the hose alone. A replacement assembly may not be without special tools or equipment when using Parker B available, some equipment dealers are unable to stock all of the many Reusable Hose fittings. odd tube configurations. 3-Piece Design - Body, nut and ferrule. Wedging action of fer Parker FERRUL-FIX, a field attachable, reusable hose end fitting, rule, when drawn down by nut, forms seal between body and now makes it possible to salvage the bent tube section of the origi- ferrule, while cutting edge of ferrule "bites" into tube wall forming another nal assembly for replacement. Most important, it gets you back into positive seal. operation FAST! Visible Bite - Extent of bite at cutting edge of ferrule is completely visible when fitting is dis-assembled, an important safety feature. Self-centering � Gets you back in operation fast - No costly delays action assures even bite around circumference of tube. while replacement assemblies are rushed from the Parkerized Finish - Ferrul-Lok fittings have the Parkerized black finish, factory. providing "built-in" lubrication which reduces wrench � Lets you reuse expensive bent tube ends with torque required. Parker Hose fittings - You can replace the hose at a fraction of the cost of complete assembly. C Ferrul-Fix Installation Instructions D 1. Cutthe formed tube offsquarelynext to the permanent hose fitting.7. Assemble Ferrul-Fix fitting to hose. Refer to assembly instructions Lightly deburr the end of the tube internally and externally. listed in appropriate fittings section. Do not assemble to hose 2. Disassemble the Ferrul-Fix fitting, and lubricate threads and bothbefore steps 1-6. EquipmentAccessoriesTechnicalHoseFittings ends of the ferrule with Parker Ferulube. 8. Reassemble tubing into Ferrul-Fix end and turn nut down easily 3. Slide nut and ferrule onto tubing, with the long, straight end of theuntila sudden increase in force is evident. Turnbent tubeto proper ferrule pointing toward the tube end. position if required. Using two wrenches, one on the fitting nipple 4. Insert tube end into the Ferrul-Fix body until it bottoms againsthex and the other on the nut tighten nut an additional 1/6 turn (one the shoulder. Slide ferrule inside body, and screw nut down fingerwrench flat). tight. 5. Wrench nut down 1-3/4 turns to preset the ferrule. 6. Disconnect nut and inspect lead edge of ferrule to make certain that the biting edge has turned up a shoulder to a height of at least E 50% of the ferrule and completely around the tube. E-11 Hose Products Division Parker Hannifin Corporation Wickliffe, Ohio Ferrule-Fix
Goodyear Rubber Products
