Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Prestomatic SAE Encapsulated Cartridges Prestomatic SAE Encapsulated Cartridges Advantages Tube Assembly Instructions Parker Prestomatic SAE Encapsulated Cartridges are a compact, 1. Cut Parker Parflex thermoplastic squarely using Parker tube cutter economical design that allows the user to eliminate the space and laborPTC-001. Metal tubing should be cut square and free of burrs. required to install and assemble a conventional pipe thread fitting 2. Insert end of tubing into cartridge until it bottoms. Pull on tubing to connection. Weight reduction and the elimination of pipe thread verify it is properly retained leakage related to improper assembly techniques are achieved. The SAE Cartridge design allows for faster and easier installation of 3. To disassemble, simply hold release button against the body and components and assemblies.The SAE Cartridge is retained in the remove tubing cavity by 3 barbs versus the normal 2 barbs for better performance over a wider diameter tolerance range. The external o-ring seals radially and4. To reassemble, lubricate leading end of tubing with light oil or does not require special chamfers at the top of the cavity to effect apetroleum jelly seal. The SAE Cartridge includes a built in tube support. Once the SAE Cartridge is installed in a single step cavity, no special tools are neededOrder for tube assembly. Just bottom the tubing into the cartridge body for aBy part number and name positive seal. Nomenclature Materials Part numbers are constructed from symbols that identify the style and Parker's Prestomatic SAE Encapsulated Cartridges have been size of the cartridge developed for both soft metal and plastic cavity applications. Consult factory for specific cavity or housing materials that would be suitable for Example: a particular application. PMTCE -4 I Specifications Cavity dimensions are per the proposed SAE Standard J2494-4.The Prestomatic SAE Cartridge Prestomatic SAE Encapsulated Cartridge is thoroughly tested to meet 1/4" (4/16) Tube Size or exceed the performance requirements of DOT FMVSS 571.106 and SAE J1131 and the proposed dimensional standards of SAE J2494-4 Special Cartridges in 6061-T6 aluminum. Cavity dimensions specified by SAE J2494-4 Encapsulated cartridge configurations and /or sizes other than those need to be adjusted slightly for optimum performance in material other shown in the catalog can be furnished. Non-standard o-ring materials than 6061-T6. are available. It is suggested that a print or sketch be submitted with the inquiry. Price and delivery for non-stock items furnished on request for Technical Data specified quantities. � Working pressure from vacuum to 250 psi � Working temperature from -40�F to +200�F (Note: See tubing manufacturer's recommendations for pressure and temperatures limitations.) Features � Easy assembly � Patented third generation Prestomatic* brass componentry which includes a shoulder for increased side load capabilities, contamina- tion resistance features and tight internal tolerances for a close fit and smooth operation. � Available in tube sizes 5/32** 1/4", 3/8", 1/2", 5/8" and 3/4" � Available in elbows and straight configurations � Built in Brass tube support assures maximum flow and performance characteristics **DOT only U.S. Patent No. 5,683,120 Parker Hannifin Corporation I3 Parker Brass Products Division Otsego, Michigan Prestomatic SAE Encapsulated Cartridges
Goodyear Rubber Products
