Air brake-NTA Fittings Parker Brass Catalog Goodyear Rubber Products

Goodyear Rubber Products

Click Here to open this page in a new window.

Catalog 3501E                                                                                 Air Brake�NTA Fittings
Assembly Instructions
1. Cut tubing squarely�maximum of 15� angle allowable.
    � Use of Parker tube cutter PTC-001 is recommended.
                                                                                                 PTC-001
2. Check that port or mating part is clean and free of
    debris.
3. Insert tubing into fitting until it bottoms on seat.
4. Tighten nut with wrench until one thread remains visible
    on the fitting body; (this will allow for a number of
    remakes) or, the nut should be screwed down finger
    tight, then the wrench-tightened as indicated in the
    following table.
                                  Additional Number of
              Tube Size           turns from hand- tight
                 1/4                         3
              3/8 & 1/2                      4
              5/8 & 3/4                    3-1/2
                                                                                                                                     G
                                                                                                Parker Hannifin Corporation
                                                              G5
                                                                                                Parker Brass Products Division
                                                                                                Otsego, Michigan

Goodyear Rubber Products

CALL TOLL FREE
IN THE USA
1-866-711-4673

INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE

CALL TOLL FREE IN THE USA 1-866-711-4673

INTERNATIONAL SALES CALL +1-727-342-5086 WE SHIP WORLDWIDE

CALL TOLL FREE
IN THE USA
1-866-711-4673

INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE