Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
D SAE 45� SAE 45� Flared Fittings Advantages Order This economical fitting resists mechanical pullout. Can be assembledBy part number and name. SAE 45� flared bodies and nuts are and disassembled repeatedly. Manufactured from CA 360, CA 345 or separate items. Both numbers must be indicated when ordered. CA 377 brass. Nomenclature Specifications Part numbers are constructed from symbols that identify the style and Listed with Underwriter's Laboratories for flammable liquid, marine,size of the fitting. The first series of numbers and letters identifies the refrigeration and gas applications. Meets functional requirements ofstyle and type fitting. The second series of numbers describes the size. SAE J512 and J513, ASA and MS (Military Standards). Refer to list of UL listed fittings on page M10 for specific configurations. Example: 1 49 F �6 �4 Applications Forging (1) Use with copper, brass, aluminum and welded steel hydraulic tubing Extrusion (2) that can be flared. Manufactured especially for hard-to-hold liquids and Flare to external pipe, 90� elbow gases. Flare fitting Working Pressure Ranges 3/8" (6/16) tube O.D. size Temperature and type of tubing used are important factors. However, 1/4" (4/16) pipe size the following table is a good guide for proper selection.Temperature 73�F with copper tubing: Sizes PSI TUBE TUBE Tube sizes are determined by the numbers of sixteenths of an inch in O.D. (IN.) WALL (IN.) the tube O.D. 2800 1/8 .030 1900 3/16 .030 Special Fittings 1400 1/4 .030 Fitting configurations and/or sizes other than those shown in the 1200 5/16 .032 catalog can be furnished. It is suggested that a print or sketch be 1000 3/8 .032 submitted with the inquiry. Special UL stamped fittings are available. 750 1/2 .032 Please consult price list. 650 5/8 .035 550 3/4 .035 Pricing 450 7/8 .035 Only items priced in current supplementary price list PL3501 are carried in stock. Price and delivery for non-stock items furnished on Temperature Ranges request for specified quantity. From -65� to +250�F. Vibration Short nut may be used when vibration is minimal.The long nut offers additional vibration capacity. Assembly Instructions 1. Cut tubing squarely and clean tube end thoroughly to remove burrs. 2. Place nut onto tube. Place threaded end of nut toward end of tube. 3. Flare tube end with flaring tool to provide 45� flare. 4. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight.Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal. Flare fittings are easy to disassemble and may be reassembled repeatedly, for a leak-proof connection. Parker Hannifin Corporation D4 Parker Brass Products Division Otsego, Michigan SAE 45�
Goodyear Rubber Products
