Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
In-line Flow Control C In-Line Flow Control Valves General Information It is sometimes impossible to mount a flow control directly on the port of Adjustment screw the cylinder, either due to lack of space or because of the need for Locknut remote adjustment of the flow control.To resolve this problem in-line flow controls are designed to mount on the piping between the Check valve directional valve and the cylinder or can be mounted on the control panel next to other control units. Exhaust To power from cylinder valve Designed to be versatile Parker In-Line Flow Controls are unidirectional flow control valves. Intake air flows freely through the flow control; exhaust air is metered out through a specially designed adjustment screw. An arrow on the body of the valve indicates the direction of controlled flow. Since it is a Clip tube to tube connection, our in-line flow controls may be installed as a meter in or a meter out device. Parker in-line flow controls can be easily added to existing circuitry. Simply splice it into the cylinder port line.In-line flow controls may be Slots used individually or, they may be stacked together using two joining clips, supplied standard with each valve. Panel mounting is accom- plished by using the through holes in the molded body. Adjustment characteristics Control is achieved through a finely threaded special adjustment screw. Inlet Outlet The special shaped adjustment screw produces a more linear flow chamber chamber control than ordinary tapered screws.With the use of a locking nut, the in-line flow control may be secured in its final setting. Settings are maintained even under adverse conditions such as vibration. A captive adjustment screw prevents loss or dangerous blow out. Full flow in both directions Intake capacity is always slightly greater than the full open exhaust capacity, enabling maximum variation of speeds between outward and return strokes. Advantages Inlet Exhaust � Assembly in banks Flow regulation on the exhaust port � Panel mounting � Allows other function fittings to be mounted on a cylinder Inlet Outlet � Space saving chamber chamber � Weight saving � Flexibility Valve Specifications Maximum Working pressure: 145 PSI Operating Temperature: +5� - +150� F Body material: High resistance polyamide Adjustment screw material: Brass Inlet Exhaust Flow regulation on the inlet port Parker Hannifin Corporation C21 Parker Brass Products Division Otsego, Michigan In-line Flow Control
Goodyear Rubber Products
