Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
APoly-Tite Poly-Tite Fittings Advantages Order A compact brass compression fitting designed to speed any installa-By part number and name. tion. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer sleeve holds plastic tubingNomenclature where it belongs, even when the system pressure exceeds the tubingPart numbers are constructed from symbols that identify the style and burst point. Poly-Tite sleeves have superior resilience to resist creepingsize of the fitting. The first series of numbers and letters identifies the and stress caused from compression.The black acetal copolymer style and type fitting. The second series of numbers describes the size. sleeve also resists ultra-violet ray attack and has excellent dimensional stability. Poly-Tite nuts will rotate around the sleeve as it tightens toExample: 66 P �4 �2 prevent twisting and weakening of the plastic tubing. Poly-Tite fittings Female Connector can be assembled and disassembled repeatedly. (Tube to female pipe) Poly-Tite Materials 1/4" (4/16) Tube O.D. Bodies and Nuts: CA 377, CA 360, CA 345, 316 Stainless Steel Plastic Sleeves: Acetal Copolymer. 1/8" (2/16) Pipe Thread O-rings: Buna N on chrome plated couplings Viton on stainless steel couplings Sizes Tube sizes are determined by the number of sixteenths of an inch in the Applications Use with Parker Parflex� or other high-quality thermoplastic tubing fortube O.D. pneumatic instrumentation circuits, lubricant and coolant lines, and applications with other gases and liquids. For use with soft metal tubingSpecial Fittings and nylon thermoplastic tubing, use brass sleeve and nut assembly Fitting configurations and/or sizes other than those shown in the 61PB. catalog can be furnished. It is suggested that a print or sketch be submitted with the inquiry. Working Pressure and Temperature Ranges Up to 150 PSI from 0� to +150�F with thermoplastic tubing. Up to 300Pricing PSI from 0� to +175�F with soft metal tubing. Only items priced in current supplementary price list PL3501 are carried in stock. Price and delivery for nonstock items furnished on request for specified quantity. Assembly Instructions Polyethylene, polypropylene and vinyl tubing: 1. Cut tubing squarely�maximum of 15� angle allowable. 2. Check that port or mating part is clean and free of debris. 3. Insert tube end until it bottoms in the Poly-Tite fitting and tighten knurl/hex nut finger-tight -- plus one wrench turn. Tube Support O.D. Copper, aluminum and nylon tubing: Brass sleeves are recommended. Insert tube until it bottoms in the * D1 Tube Poly-Tite fitting and tighten one wrench turn past finger-tight. Tube Size D1 Support Maximum allowable metal tube wall thickness for use with Inches O.D. Poly-Tite fittings: 1/8", 3/16" O.D. -- no limitation, 1/4" O.D. -- .035 1/4 .168 5/16", 3/8", 1/2" O.D. -- .049 5/16 .185 3/8 .248 1/2 .373 D * Note: No tube support for sizes 1/8" and 3/16" Parker Hannifin Corporation A30 Parker Brass Products Division Otsego, Michigan Poly-Tite
Goodyear Rubber Products
