Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
AParker Metru-Lok Parker Metru-LokTM Fittings Advantages Excellent vibration resistance Metru-LokTM is a one-piece, ready-to-use, bite-type fitting for use with� Vibration is contained by the rear compression of the ferrule either copper or plastic tubing.The ferrule is held captive in the nut.Theextending outside the nut. fitting is designed to permit tube entry and fitting makeup without � The tube is held at the bottom of the fitting. removal of the nut and ferrule, avoiding the assembly of the fitting components prior to use. � The tube is thus held between the above two points so that vibration running along the tube does not affect the sealing and bite area. Fitting ready to use � Compact fully assembled fitting, timesaving at makeup. How to Use: Assembly � Cut the tube square. � Captive snap in ferrule. � De-burr (copper tube). � Simplified handling and stock-keeping. � Insert the tube through the nut and ferrule until it bottoms. � No presetting of the ferrule necessary. � Finger tighten the nut. Positive sealing and bite � The wedging action of the nut when tightened causes the ferrule to� Wrench tighten the nut one turn, or one and one half turns, bite into the outside diameter of the tube wall for a leakproof according to size. connection. Disassembly - remake � With flexible tubing (polyurethane, PEBA or polyethylene), it is � The Metru-Lok fitting can be assembled and disassembled at least recommended to use a tube insert for a positive holding of the tube. 15 times. At each remake, hand tighten the nut, then wrench tighten 1/16 of a turn. Safety � Visible ferrule (extending to rear of nut) allows quality control checks for correct assembly. Technical Features MATERIAL WORKING WORKING PRESSURE* DEPENDING ON TUBE O.D. 1 2 3 TEMP. 1 2 3 BODY NUT FERRULE FROM -65� TUBE O.D. MM 4 6 8 10 12 14 16 to 20 BRASS BRASS BRASS TO +250� F PSI 2600 2600 1800 1500 1300 1000 800 1 2 3 4 5 6 WRENCH Fitting Dimensions TUBE O.D. METRIC INSIDE HEX OF TUBE TUBE TIGHTENING MM STRAIGHT DIAMETER NUT ENTRY ENTRY IN TURNS THREAD MM MM BODY COMPL. 1 MM FITTING MM 4 M8x1 2 10 4 12 1 1/2 6 4 6 M10x1 4 12 5 13 1 1/2 5 8 M12x1 6 14 6 14 1 1/2 2 10 M14x1 8 17 6 14 1 1/2 12 M16x1 10 19 7 15 1 1/2 14 M18x1 12 22 8 16 1 1/2 16 M22x1.50 14 27 8 16 1 18 M24x1.50 16 30 9 21 1 3 20 M26x1.50 18 32 9 21 1 22 M28x1.50 20 36 10 22 1 Parker Hannifin Corporation A20 Parker Brass Products Division Otsego, Michigan Parker Metru-Lok
Goodyear Rubber Products
