Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
OETIKER Clamps and Rings System OETIKER OETIKER Ear Clamp with Dimple � the Original Condition of the Steel Edge The OETIKER System has the ear with a dimple. As the geometry of The independent strip processing facilities apply stringent controls the closed ear is kept very low, the clamping force is increased andto ensure that bandsteel edges are smooth. This greatly reduces the creates a spring effect when the hose material expands or contractspotential for damage to the hose material. in response to thermal or mechanical influences such as temperature, vibration, etc. Tolerance Compensation By closing the clamp ear with a recommended, uniform force � with force priority � component tolerances within the working range of a Stepless� Ear Clamp can be compensated. To achieve this, the ear gap must vary according to the actual size of the parts. For perfect sealing, ear clamps must be closed correctly. For detailed information, please see the Technical Data Sheet for the relevant product group. Tolerance Compensation and the ability to influence the radial N Dimensions,om Identification and Ordering force by using force-priority installation ina l for Stepless� Ear Clamps OETIKERdiamClamps and Rings are manufactured to metric dimensions. et er For identification purposes, the nominal diameter is stamped on each product. For example, "145" stands for an open (nominal) clamp diameter of 14.5 mm. As a general rule, a nominal diameter should be chosen so that the outside diameter of the elastic hose (when assembled onto the connecting part e.g. hose stem) lies slightly over the middle of the clamping range (see Technical Data Sheet or price lists of OETIKER Clamps and Rings). Dimple Clamp ear (closing element) Always quote the 8-digit part number when ordering (see Technical Data Sheet or price lists of OETIKER Clamps and Rings) Width Thickness For detailed information, please request the Technical Data Sheet for the relevant OETIKER product group. � 08901456 Rights to make technical changes in the interests of further development reserved 7
Goodyear Rubber Products
