Goodyear Rubber Products

Click Here to open this page in a new window.

BRASS
           HOSE BARB                                                                         BRASS FITTINGS
                                             Hose  Barb  Fittings
          �Temperature and Working Pressure Ranges
                                                                             � Assembly Instructions
          From -400F to + 1600F at 150 PSI maximum.
                                                                                1- Cut hose cleanly and squarely to length.
                                                                                2- Slide clamp on hose.
          � Tolerance
                                                                                3- Lubricate hose. Push hose on fitting until hose
          +/- .02 on all dimensions. Dimension Data can change
                                                                                bottoms against stop ring or hex.
          without notice. Please call us when dimensions are criti-
                                                                                4- Position hose clamp as shown below and secure
          cal.
                                                                                with a screwdriver or wrench. Maintain "A"
                                                                                dimension noted below for proper clamp position-
          �Material
                                                                                ing.
          CA360 Brass for Barstock fittings.
          CA377 Brass for Forged fittings.
          Note: These fittings are intended for use with hose clamp,
          similar type clamp or a crimped ferrule.
           See page  233-247 for hose clamps
           See page  224-225 for plastic hose barb fittings
           See page  25 for stainless steel hose barbs
                                                                                          Hose
                                                                                                             A
                                                                                           Size
                                                                                          3/16"            1/4"
                                                                                           1/4"            1/4"
                                                                                          5/16"            1/4"
                                                                                          3/8"             1/8"
                                                                                           1/2"            1/8"
                                                                                          5/8"             1/8"
                                                                                          3/4"             1/8"
                                                      Actual Profile of Hose Barbs
                                                               1/2"
                                                  3/8"
                                       5/16"
                              1/4"
                     3/16"
                                                                   IDLAND
              1/8"                                                            5/8"             3/4"                   1"
                                                                    ETAL
             .185   .227      .29      .354       .415          .53 FG. CO..645               .79                  1.02
74

CALL TOLL FREE
IN THE USA
1-866-711-4673

INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE

CALL TOLL FREE IN THE USA 1-866-711-4673

INTERNATIONAL SALES CALL +1-727-342-5086 WE SHIP WORLDWIDE

CALL TOLL FREE
IN THE USA
1-866-711-4673

INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE