Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
BONDING BONDING O-RING MAKING FILLING CRACKS 1. Cut the starting end of the cord stock with a clean razor blade. Ensure 1. Clean surface. the cut is clean and square. Do not touch the clean cut end. 2. Mix Loctite� Fixmaster� Poxy PakTM Epoxy Adhesive according to 2. Measure cord stock to appropriate length. For precise measurement, use package directions. Loctite� O-Ring Tool or the ruler provided in the Loctite� O-Ring Making Kit. 3. Spread mixed material over crack. 3. Cut the measured end of the cord stock with a clean razor blade. 4. Sets in 5 minutes, full cure in 8 hours. Ensure the cut is clean and square to optimize bond area. 5. For maximum protection, a piece of material can be applied over 4. Apply one drop of Loctite� 404TM Quick SetTM Instant Adhesive and mate the top of the crack to spread the load after applying the mixed the two ends of the cord stock. adhesive. The adhesive will hold it in place. BONDING METAL LABEL STRUCTURAL BONDING 1. Clean surface. 1. Prepare the surface using Loctite� ODC-Free Cleaner and Degreaser. 2. Spray Loctite� 7387TM Depend� Activator onto main part. Let dry 2. Attach mix nozzle to the Loctite� H8600TM Weld EliminatorTM Structural for two minutes. Adhesive cartridge. 3. Apply Loctite� 330TM Depend� Adhesive onto back of label. 3. Dispense 50 mm (2") of material to prime nozzle. 4. Press label onto activated surface and hold for a few seconds. 4. Apply a continuous bead of adhesive in the area you want to patch and/or seal. 5. Reaches handling strength in 5 minutes. Full cure in 24 hours. 5. Assemble patch using pneumatic pins or rivets, or run screws to hold parts together while the adhesive reaches full cure. 6. Equipment can be back in operation after 24 hours. 32 33
Goodyear Rubber Products
