Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
HOUSED COMPONENTS RETAINING COMPOUNDS SEALING/RETAINING -- METALLIC SEAL LOCTITE� RETAINING COMPOUND QUICK SELECTOR Application Loctite� Product Loctite� Primer Shaft Mount � Press fit Medium Strength 609TM (QuickStixTM 668TM) Retaining CompoundNONE 641TM Retaining Compound NTM Shaft Mount � Shrink fit Medium Strength 641TM Retaining Compound NONE Shaft Mount � Slip Fit Small Gap (.002" Radial max.) 609TM (QuickStixTM 668TM) Retaining CompoundNTM Larger Gap (.010" Radial max.) 660TM Quick Metal� Retaining CompoundNTM Maximum Strength (.010" Radial max.)680TM Retaining Compound NTM Maximum Temperature (400�F) 620TM Retaining Compound NTM (.008" Radial max.) 2440TM Bead TM TM Medium Strength 641 Retaining Compound N Housing Mount � Press Fit Maximum Strength 609TM (QuickStixTM 668TM) Retaining CompoundNONE 1. Clean the housing I.D. and seal O.D. with Loctite� ODC-Free Cleaner & Degreaser. Medium Strength 641TM Retaining Compound NTM TM 2. Spray both the housing and seal with Loctite� 7649TM Primer NTM. Low Strength 2440 Threadlocker NONE 3. Apply a bead of Loctite� 2440TM (QuickStixTM248TM) Threadlocker to the Housing Mount � Slip Fit leading edge of metallic seal O.D. TM Maximum Strength 680 Retaining Compound NONE Note: Virtually any Loctite� Threadlocking product will work here. High Strength 660TM Quick Metal� Retaining CompoundNONE Medium strength liquid is recommended due to normal gap TM � TM Controlled Strength 660 Quick Metal Retaining CompoundN and strength requirement. Medium Strength 641TM Retaining Compound NTM 4. Install as usual. TM TM TM TM Low Strength 2440 (QuickStix 648 ) ThreadlockerN 5. Wipe off excess. 6. Allow to cure 30 minutes. Note: � Softer metals (Aluminum, Bronze, etc.) provide lower Note: � Loctite� 2440TM (QuickStixTM248TM) Threadlocker is normally shear strengths than ferrous components. used with worn seal housings to prevent leakage or slippage. � Excessive gap reduces shear strengths. � It is not generally necessary to remove pre-applied sealant from � Ideal surface finish -- 50 to 80 rms. seal O.D. Refer to Technical Data Sheets for more information. 26 27
Goodyear Rubber Products
