Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Pro-Flow Specification Sheet � Rubber Covered Hose � 11/2", 13/4", 2", 21/2" and 3" when subjected to the following cold bending test: a 50 ft. a Scope length of dry hose is to be firmly coiled and placed in a cold Quality: The fire hose assembly supplied under this spec- box at -35�F for a duration of 24 hours. Immediately after ification shall be constructed with superior quality materials. removal of the hose from the box, hose should be uncoiled NFPA 1961 standards shall be observed in production of the and laid out by one operator. Following this procedure, the assembly, in order to ensure its quality and durability. hose shall not leak nor show any damage to the reinforce- Warranty: Pro-Flow hose shall carry a 5 year warranty ment when subjected to the hydrostatic acceptance test against defects in material and workmanship. Barring any stated above. mistreatment or accidental damage the warranted hose a Ozone Resistance will be replaced at no charge. Hose shall show no visible signs of cracking to the lining or cover when tested in accordance to ASTM D518 a Hose Construction Procedure B (100pphm/118�F/70 hours). Hose shall be made from 100 percent high tenacity syn- thetic yarn, circularly woven and completely protected a Chemical Resistance and locked-in by tough highly resistant synthetic nitrile Exposure to sea water and contamination by most rubber, forming a single homogeneous construction with- chemical substances, hydrocarbons, oils, alkalis, acids out the use of glues or adhesives of any type. and greases must have no effect on the short or long term performance of the hose. A chemical resistance a Lining Properties chart is available and Key Fire Hose will supply specific Ultimate Tensile Strength: Tensile strength of the chemical resistance data on request of purchaser for lining and cover shall not be less than 1500 PSI. unique applications. Ultimate Elongation: 400 percent minimum. Accelerated Aging Test: The tensile strength and a Heat Resistance ultimate elongation of the vulcanized rubber compound The hose, when subjected to a static pressure of 100 PSI, which has been subjected to the action of oxygen at a shall be capable of withstanding a surface temperature of pressure of 300 PSI (�10PSI) and a temperature of 1200�F for a minimum of two minutes without rupture 158�(�18�)F for a period of 96 hours shall retain 60 per- or damage to the synthetic reinforcement. cent of its originally stated properties. a Hose Weight and Coil Diameters a Hydrostatic Pressure Test The hose shall conform to the following average weights and diameters Service Test Acceptance Burst Part # Diameter Pressure Test Pressure Pressure Weight per Coil Size-Coupled Part # Diameter 1 RC15-500 1/2" 250psi 500psi 800psi Length (Coupled) per 50' Lengths 3 1 RC17-500 1 /4" 250psi 500psi 800psi RC15-500 1 /2" 16 lbs 151/2 in. 3 RC20-500 2" 250psi 500psi 750psi RC17-500 1 /4" 17 lbs 16 in. 1 RC25-500 2 /2" 250psi 500psi 750psi RC20-500 2" 19 lbs 17 in. 1 RC25-500 2 /2" 26 lbs 17 in. RC30-500 3" 250psi 500psi 750psi RC30-500 3" 32 lbs 18 in. Note: Per NFPA, attack hose shall have a minimum design service a Color pressure of 300 psi. See our Dura-Flow line for this type of hose. The stock colors are HI-VISIBILITY yellow or red. a Abrasion Resistance Other colors available upon request. Hose shall withstand 20,000 cycles on the Taber Abrasion a Couplings Machine (H-22 Wheel: 1 kg). Key Fire Hose Corporation on As required by purchaser, expansion ring threaded, request will supply written warranties that PRO-FLOW hose STORZ clamp ring, etc. meets a minimum 20,000 cycles. Other abrasion test results Key reserves the right to modify any specification with- (UL, DIN, etc.) can be supplied on request of purchaser. out prior notice to meet or exceed changing standards. Customers are advised that special diameters or con- a Cold Resistance struction characteristics can be produced on special Hose shall have a capability of use down to -35�F. Hose shall request and you are requested to contact Key Fire Hose have no apparent damage to cover, reinforcement or lining Corporation, Miami, Florida. KF-046 07/03
Goodyear Rubber Products
