Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
� GYLON Gasketing Typical Physical Properties* GYLON�Styles 3500 3504 3510 3530 3540 3545 Color Fawn with Blue with Off-white with Black with White with White with black brand black brand black brand no brand black brand black brand Composition PTFE with PTFE with PTFE with PTFE with Microcellular Microcellular silica glass barium graphite PTFE PTFE microspheres sulfate Temperature1 Minimum -450�F -450�F -450�F -450�F -450�F -450�F (-268�C) (-268�C) (-268�C) (-268�C) (-268�C) (-268�C) Cont. max. +500�F +500�F +500�F +500�F +500�F +500�F (+260�C) (+260�C) (+260�C) (+260�C) (+260�C) (+260�C) Pressure, psig 1,200 800 1,200 1,200 1,200 1,200 1 Cont. max. (bar) (83) (55) (83) (83) (83) (83) PxT,max.1 1/32", 1/16" 350,000 350,000 350,000 350,000 350,000 350,000 (0.8 mm,1.6 mm) (12,000) (12,000) (12,000) (12,000) (12,000) (12,000) psig x �F 1/8" 250,000 250,000 250,000 250,000 250,000 250,000 (bar x �C) (3.2 mm) (8,600) (8,600) (8,600) (8,600) (8,600) (8,600) Sealability ASTMFuelA ml/hr 0.22 0.12 0.04 0.02 0.25 0.15 3 (ASTM F37B) GasPermeability cc/min. < 0.015 < 0.015 < 0.015 < 0.015 < 0.015 < 0.015 4 (DIN 3535 Part 4) CreepRelaxation % 18 40 11 29 10 15 (ASTM F38) CompressibilityRange (ASTM F36) % 7-12 25-45 4-10 7-17 70-85 60-70 Recovery % >40 >30 >40 >40 >8 >15 (ASTM F36) TensileStrength psi 2,000 2,000 2,000 3,000 -- -- 2 (ASTM D1708) (N/mm ) (14) (14) (14) (21) Flammability Will not support flame BacterialGrowth Will not support Notes: 1 Based on ANSI RF flanges at our preferred torque. When approachingThis is a general guide and should not be the sole means of selecting maximum pressure, temperature or 50% of maximum PxT, consult or rejecting this material. ASTM test results in accordance with ASTM Garlock Engineering. For Styles HP 3560 and HP 3561, consult F-104; properties based on 1/32" (0.8mm) sheet thickness, except Style Garlock if approaching maximum temperature, or 50% of maximum 3565, based on 1/16" (1.6mm). pressure or P x T. 2 For HP 3560 and HP 3561, 1/16" thickness only; for 3535, 1/4" thick-*Valuesdonotconstitutespecificationlimits ness only. 3 ASTM F37B Sealability, milliliters/hour (1/32" thick) ASTM Fuel A (isooctane): WARNING: 2 Properties/applications shown throughout this brochure are typical. Your specific Gasket load = 1,000 psi (7 N/mm ), application should not be undertaken without independent study and evaluation Internal pressure = 9.8 psig (0.7 bar) for suitability. For specific application recommendations consult Garlock. Failure 4 DIN 3535 Part 4 Gas Permeability, cc/min. (1/16" thick) to select the proper sealing products could result in property damage and/or serious personal injury. Nitrogen: Internal pressure = 580 psig (40 bar), 2 Performance datapublishedin thisbrochure hasbeen developed from field testing, Gasket load = 4,640 psi (32 N/mm ) customer field reports and/or in-house testing. While the utmost care has been used in compiling this brochure, we assume no responsibility forerrors.Specificationssubject tochange withoutnotice. Thisedition cancels all previous issues. Subject to change without notice. GARLOCK is a registered trademark for packings, seals, gaskets, and other products of Garlock. C-11
Goodyear Rubber Products
