Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
Style CG GASKET SELECTION What style of gasket should I select? Utilizes an external ring which accurately centers gasket on flange face, provides additional radial strength to prevent gasket blow-out and acts as a compression stop. A general purpose gasket suitable for use with flat face and raised face flanges up to and inclusive of class 2500. Above class 600 an internal ring is recommended Style CGI A Style CG gasket fitted with internal ring which gives an additional compression limiting stop and provides heat and corrosion barrier protecting gasket windings and preventing flange erosion. Suitable for use with flat face and raised face flanges and specified for high pressure/temperature service - class 900 and above or where corrosive or toxic mediaStyle CG Style CGI are present. Style R Basic construction type. Inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression and sealing characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies. Style RIR Solid inner metal ring acts as a compression stop and fills the annular space between flange bore and the inside diameter of the gasket. Designed to prevent accumulation of solids, reduce turbulent tlow at process tlulds and minimize erosion at flange faces.Style R Style RIR Suitable for male and female pipe flanges. SELECTION GUIDE Published as an indication of which Flexitallic Spiral wound Gasket best suits different pipe flange Configurations and service conditions. Flange Face Recommended Gasket Style Recommended *NOTE Gasket Style It is essential that Style R gaskets operate with a For high pressure/ compression stop. without a correctly dimensioned temperature duty, stop the gasket con easily be overcampressed resulting also for gaskets with in failure. To provide a compression stop the depth of PTFE filler, corrosive or the tongue, groove or recess is controlled to provide fluctuating pressure or optimum compressed gasket thickness with metal to temperature service metal contact at the flange faces (see Page 25, conditions. Table 16). 6
Goodyear Rubber Products
