Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
180� Aluminum Rack and Pinion Actuator A 180� Aluminum Rack and Pinion Actuator B � NAMUR VDI/VDE 3845 and ISO 5211 dimensions on all sizes. No special blocks are required to mount solenoid C valves, limit switches or positioners. � The standard angle of rotation is 180�. Additional travel rotations of 120�, 135�, 150� are available. D MA016 and larger sizes feature a travel stop with � 10� adjustment in both open and close directions E (International Patent). � The 'patent pending' bottom plate design, unique to Dixon Sanitary secures a captive pinion (anti-blowout F system) and permits flexibility in mounting by retaining AISI 304 nuts (standard) or AISI 304 bolts (optional) In either dual ISO patterns, or to customer dimensions Double Acting G � All pinions are supplied with anti-blowout retention in both directions � The female pinion drive Is standard with a double square H output drive and optional with a double-D drive, keyed drive and designs to meet your specific requirements � Shaft bearings isolate the pinion gear from the housing I and support the shaft for high cycle applications � The pinion teeth are engaged for the full length and stroke of the piston. The pinion height allows manual J override without disturbing the position Indication � Extruded aluminum body is internally machined and K lapped to exact specifications. All internal and external surfaces are anodized for corrosion resistance � External open/closed indicator Is standard, available for Spring Return L all rotations � Pistons incorporate double wear pads to separate the rack from the actuator wall and serve as both guide and M wear bearings � Epoxy coated special steel springs are pre-loaded with � All external fasteners are corrosion resistant stainless non-metallic materials. The stainless steel end cap steel N fasteners are extra long to allow for spring relaxation, � All units are permanently lubricated at the factory with all parts are corrosion resistant non-silicone grease � Air pressure operation from 40 to 150 PSI. Water, � All units are externally stamped with a progressive O nitrogen and compatible hydraulic fluids may as be traceable serial number used to power the actuator � 100% of all units are factory pressure and leak tested P Specifications Q Operating pressure range 40 to 120 PSIG R Maximum allowable working pressure 150 PSIG Operating media Dry or lubricated non-corrosive gas Operating temperature standard -40�F to 176�F S Piston and pinion lubrication Non-silicone grease Range of rotation adjustment Between 170� and 190� T Valve and accessory mounting Standard ISO 5211 bolt patterns Output shaft Female � Double square U Design Twin rack and pinion Factory testing cycles 1 million V Dixon Sanitary 2008 Catalog 147 W pgs131-152 Actuation.pmd 147 10/3/2007, 1:46 PM 180� Aluminum Rack and Pinion Actuator
Goodyear Rubber Products