Goodyear Rubber Products
CALL
TOLL FREE
IN THE USA
1-866-711-4673
INTERNATIONAL SALES CALL
+1-727-342-5086
WE SHIP WORLDWIDE
International Sales Click Here
Get A
Quote
Now
Home
About Us
Product Brands
Catalogs
Contact Us
Locations
Corporate Headquarters,
Clearwater, Florida, (FL)
Parker Store, Bradenton, Florida, (FL)
Parker Store, St. Petersburg, (FL)
Parker Store, Ft. Myers, Florida, (FL)
Parker Store, Naples, Florida, (FL)
Parker Store, Tampa, Florida, (FL)
<< Previous Page
Click Here
to open this page in a new window.
Next Page >>
A Filters, Regulators and Lubricators Wilkerson Modular Coalescing Filters B Heavy Duty Metal Bowl Automatic Drain C Size Part # SCFM Price/E 1-1/2" M35-0BAMB 445 $1541.60 2" M35-0CAMB 445 1541.60 � 0.01 micron coalescing filter element standard D � 1 qt. metal bowl � Must be used with airline filter as pre-filter � Compressed air purity down to an oil content of 0.01 P.P.M. � 0.003 micron oil vapor/oil odor removal filter element E optional � Elements resistant to acidic mineral oils and synthetic lubricants F A standard airline filter should be installed as a pre-filter when using a coalescing filter. G Wilkerson Manual In-Line Desiccant Dryers H Transparent Bowl with Guard Size Part # SCFM Price/E 1/4" X03-02 10 $293.80 I Metal Bowl Size Part # SCFM Price/E 1/4" X03-02MB 10 $391.70 J � 1.64 lb. capacity bowl � Will dry up to 4400 standard cubic feet of air � Provides atmospheric dew point of -45�F with dry K desiccant at 100 PSI and 70�F � Silica gel changes from blue to pink to indicate the need to replace or regenerate the desiccant � Slotted bowl guard for visual detection of color change � Desiccant is good for approximately 8 hours at maximum L continuous air flow before regeneration is required � Maximum operating conditions: Transparent bowl: 150 PSIG (10 bar) and 125�F (52�C) FittingsFittingsFittingsFittingsValvesClampsFittingsRepair&WeldingFittingsFittingsFittingsGrooveJointsFittingsFittings PlasticBrassHydraulicTruckTankHoseHoledallMaintenanceFire&PipeAirBossSanitarySwivelShank&Cam Metal bowl: 150 PSIG (10 bar) and 150�F (66�C) M Manual air dryers are used to remove water vapor from compressed air systems, in applications such as paint spraying, laboratory instruments and small control air systems. Filtration for absorber type dryers is important to protect the desiccant bed from contamination. Cleaner incoming air will result in better performance, longer life and fewer service problems. To regenerate silica gel desiccant, it must be heated to at least 350�F for approximately 3 hours or until color has changed fromN pink to blue. Allow desiccant to cool to room temperature before pouring back into unit bowl. An afterfilter should be placed downstream from the desiccant dryer to ensure solid contaminants such as desiccant dust do not migrate downstream. O A standard airline filter and modular coalescing filter should be used as pre-filters when using a desiccant dryer. SCFM ratings at 150 PSIG inlet pressure. P DPL108 177 pages161-181.pmd 177 10/5/2007, 10:03 AM
Goodyear Rubber Products
